[    0.547347] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.547377] intel_idle: MWAIT substates: 0x1120
[    0.547378] intel_idle: v0.4 model 0x2A
[    0.547379] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.547444] ipmi message handler version 39.2
[    0.547485] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.547488] ACPI: Power Button [PWRB]
[    0.547512] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.547513] ACPI: Power Button [PWRF]
[    0.547963] GHES: HEST is not enabled!
[    0.548022] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.568430] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.569305] Linux agpgart interface v0.103
[    0.570169] brd: module loaded
[    0.570597] loop: module loaded
[    0.570669] ata_piix 0000:00:1f.2: version 2.13
[    0.570730] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.726420] scsi0 : ata_piix
[    0.726510] scsi1 : ata_piix
[    0.726543] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
[    0.726547] ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
[    0.726624] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.727054] scsi2 : ata_piix
[    0.727208] scsi3 : ata_piix
[    0.727241] ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    0.727244] ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[    0.727431] libphy: Fixed MDIO Bus: probed
[    0.727483] tun: Universal TUN/TAP device driver, 1.6
[    0.727483] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.727545] PPP generic driver version 2.4.2
[    0.727603] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.727606] ehci-pci: EHCI PCI platform driver
[    0.727683] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.727687] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.727698] ehci-pci 0000:00:1a.0: debug port 2
[    0.731595] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[    0.731611] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    0.741955] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.742018] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.742020] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.742022] usb usb1: Product: EHCI Host Controller
[    0.742023] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.742024] usb usb1: SerialNumber: 0000:00:1a.0
[    0.742156] hub 1-0:1.0: USB hub found
[    0.742163] hub 1-0:1.0: 2 ports detected
[    0.742294] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.742298] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.742308] ehci-pci 0000:00:1d.0: debug port 2
[    0.746211] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    0.746221] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    0.757953] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.758013] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758016] usb usb2: Product: EHCI Host Controller
[    0.758018] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.758019] usb usb2: SerialNumber: 0000:00:1d.0
[    0.758172] hub 2-0:1.0: USB hub found
[    0.758179] hub 2-0:1.0: 2 ports detected
[    0.758241] ehci-platform: EHCI generic platform driver
[    0.758246] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.758247] ohci-pci: OHCI PCI platform driver
[    0.758252] ohci-platform: OHCI generic platform driver
[    0.758256] uhci_hcd: USB Universal Host Controller Interface driver
[    0.758310] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758313] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.758451] xhci_hcd 0000:04:00.0: irq 40 for MSI/MSI-X
[    0.758519] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758520] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758522] usb usb3: Product: xHCI Host Controller
[    0.758523] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758524] usb usb3: SerialNumber: 0000:04:00.0
[    0.758695] hub 3-0:1.0: USB hub found
[    0.758704] hub 3-0:1.0: 2 ports detected
[    0.758755] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758758] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.758788] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.758789] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758790] usb usb4: Product: xHCI Host Controller
[    0.758792] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758793] usb usb4: SerialNumber: 0000:04:00.0
[    0.758910] hub 4-0:1.0: USB hub found
[    0.758920] hub 4-0:1.0: 2 ports detected
[    0.766073] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.766482] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.766487] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.766700] mousedev: PS/2 mouse device common for all mice
[    0.767039] rtc_cmos 00:03: RTC can wake from S4
[    0.767229] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.767258] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.767304] device-mapper: uevent: version 1.0.3
[    0.767358] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.767364] ledtrig-cpu: registered to indicate activity on CPUs
[    0.767433] TCP: cubic registered
[    0.767492] NET: Registered protocol family 10
[    0.767613] NET: Registered protocol family 17
[    0.767620] Key type dns_resolver registered
[    0.767853] Loading compiled-in X.509 certificates
[    0.768561] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    0.768570] registered taskstats version 1
[    0.770119] Key type trusted registered
[    0.771342] Key type encrypted registered
[    0.772537] AppArmor: AppArmor sha1 policy hashing enabled
[    0.772539] IMA: No TPM chip found, activating TPM-bypass!
[    0.772772] regulator-dummy: disabling
[    0.772811]   Magic number: 7:172:853
[    0.772902] rtc_cmos 00:03: setting system clock to 2015-07-02 21:48:21 UTC (1435873701)
[    0.773399] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.773400] EDD information not available.
[    0.773420] PM: Hibernation image not present or could not be loaded.
[    0.790589] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.053910] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.186208] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.186213] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.186503] hub 1-1:1.0: USB hub found
[    1.186581] hub 1-1:1.0: 4 ports detected
[    1.201904] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.202008] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.210076] ata3.00: ATAPI: ASUS    DRW-24B5ST, 1.00, max UDMA/100
[    1.210138] ata4.00: ATAPI: ASUS    DRW-24B3ST, 1.00, max UDMA/100
[    1.226072] ata4.00: configured for UDMA/100
[    1.226122] ata3.00: configured for UDMA/100
[    1.297898] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.430161] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.430166] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.430455] hub 2-1:1.0: USB hub found
[    1.430531] hub 2-1:1.0: 6 ports detected
[    1.521784] tsc: Refined TSC clocksource calibration: 3092.974 MHz
[    1.701841] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.982914] usb 2-1.3: New USB device found, idVendor=048d, idProduct=1336
[    1.982919] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.982922] usb 2-1.3: Product: Mass Storage Device
[    1.982924] usb 2-1.3: Manufacturer: Generic   
[    1.982927] usb 2-1.3: SerialNumber: 00000000000006
[    2.073668] ata2.01: failed to resume link (SControl 0)
[    2.084412] ata2.00: SATA link down (SStatus 0 SControl 300)
[    2.084424] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.084441] ata1.01: failed to resume link (SControl 0)
[    2.237689] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.237700] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.246651] ata1.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max UDMA/133
[    2.246656] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.254645] ata1.00: configured for UDMA/133
[    2.254824] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68J 01.0 PQ: 0 ANSI: 5
[    2.254923] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.254925] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.254927] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.255001] sd 0:0:0:0: [sda] Write Protect is off
[    2.255004] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.255033] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.258284] scsi 2:0:0:0: CD-ROM            ASUS     DRW-24B5ST       1.00 PQ: 0 ANSI: 5
[    2.261931] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.261936] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.262119] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.262167] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.265608] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24B3ST       1.00 PQ: 0 ANSI: 5
[    2.269010] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.269195] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    2.269242] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    2.285034]  sda: sda1 sda2 sda3
[    2.285472] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.286543] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    2.286545] Write protecting the kernel read-only data: 12288k
[    2.288091] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    2.289387] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    2.298961] systemd-udevd[135]: starting version 204
[    2.312350] [drm] Initialized drm 1.1.0 20060810
[    2.320132] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[    2.328653] scsi4 : usb-storage 2-1.3:1.0
[    2.328724] usbcore: registered new interface driver usb-storage
[    2.334094] [drm] Memory usable by graphics device = 2048M
[    2.350882] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
[    2.373612] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    2.373622] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.373623] [drm] Driver supports precise vblank timestamp query.
[    2.373669] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.391178] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.391180] [drm] This can cause pipe underruns and display issues.
[    2.391181] [drm] Please upgrade your BIOS to fix this.
[    2.420311] fbcon: inteldrmfb (fb0) is primary device
[    2.521680] Switched to clocksource tsc
[    2.595982] Console: switching to colour frame buffer device 160x64
[    2.598366] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.598368] i915 0000:00:02.0: registered panic notifier
[    2.598399] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.726039] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    3.124289] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.326037] scsi 4:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[    3.326244] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.327599] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.491705] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    3.801138] random: init urandom read with 128 bits of entropy available
[    3.801290] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    3.827226] random: nonblocking pool is initialized
[   16.151237] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.216817] systemd-udevd[379]: starting version 204
[   16.318365] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.323829] lp: driver loaded but no devices found
[   16.330846] ppdev: user-space parallel port driver
[   16.337668] parport_pc 00:07: reported by Plug and Play ACPI
[   16.337719] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.340364] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   16.371745] media: module verification failed: signature and/or  required key missing - tainting kernel
[   16.372021] media: Linux media interface: v0.10
[   16.374185] Linux video capture interface: v2.00
[   16.374189] WARNING: You are using an experimental version of the media stack.
[   16.374189] 	As the driver is backported to an older kernel, it doesn't offer
[   16.374189] 	enough quality for its usage in production.
[   16.374189] 	Use it with care.
[   16.374189] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.374189] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.374189] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.374189] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.381175] WARNING: You are using an experimental version of the media stack.
[   16.381175] 	As the driver is backported to an older kernel, it doesn't offer
[   16.381175] 	enough quality for its usage in production.
[   16.381175] 	Use it with care.
[   16.381175] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.381175] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.381175] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.381175] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.388149] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[   16.388156] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.388180] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.400692] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   16.401623] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 17, latency: 32, mmio: 0xfbdff000
[   16.401633] saa7133[0]: subsystem: 5ace:7290, board: Beholder BeholdTV T7 [card=194,autodetected]
[   16.401649] saa7133[0]: board init: gpio is 0
[   16.446728] lp0: using parport0 (interrupt-driven).
[   16.465015] device-mapper: multipath: version 1.6.0 loaded
[   16.491137] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   16.502154] SKU: Nid=0x1d sku_cfg=0x4005e601
[   16.502156] SKU: port_connectivity=0x1
[   16.502157] SKU: enable_pcbeep=0x0
[   16.502157] SKU: check_sum=0x00000005
[   16.502158] SKU: customization=0x000000e6
[   16.502159] SKU: external_amp=0x0
[   16.502160] SKU: platform_type=0x0
[   16.502160] SKU: swap=0x0
[   16.502161] SKU: override=0x1
[   16.502443] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   16.502445]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.502446]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.502446]    mono: mono_out=0x0
[   16.502447]    inputs:
[   16.502448]      Rear Mic=0x18
[   16.502449]      Front Mic=0x19
[   16.502450]      Line=0x1a
[   16.502451]      CD=0x1c
[   16.502452] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   16.502453] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   16.518262] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.518805] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.518880] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.519391] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.519461] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.519522] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   16.530468] saa7133[0]: i2c eeprom 00: ce 5a 90 72 54 20 00 00 00 00 00 00 00 00 00 01
[   16.530472] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530476] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530480] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530484] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530487] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530495] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530496] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530505] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530512] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530518] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530525] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530530] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530536] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530553] saa7133[0]: i2c eeprom e0: a7 1f 01 00 ff ff ff ff ff ff ff ff ff ff ff ff
[   16.530561] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[   16.546521] tuner 9-0061: Tuner -1 found with type(s) Radio TV.
[   16.548389] xc5000: xc5000_attach(9-0061)
[   16.548393] xc5000 9-0061: creating new instance
[   16.555113] xc5000: XREG_PRODUCT_ID 2000
[   16.555117] xc5000: Successfully identified at address 0x61
[   16.555118] xc5000: Firmware has not been loaded previously
[   16.555125] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.562554] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20
[   16.562558] xc5000: xc_set_signal_source(1) Source = CABLE
[   16.573707] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   16.578904] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   16.578907] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   16.626440] xc5000: xc_tune_channel(400000000)
[   16.626443] xc5000: xc_set_rf_frequency(400000000)
[   16.774417] xc5000: *** ADC envelope (0-1023) = 1540
[   16.782417] xc5000: *** Frequency error = 0 Hz
[   16.790410] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2814
[   16.806416] xc5000: *** HW: V0.0, FW: V 0.0.0
[   16.814410] xc5000: *** Horizontal sync frequency = 7370 Hz
[   16.822412] xc5000: *** Frame lines = 980
[   16.830410] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   16.838408] xc5000: *** Unweighted analog SNR = 56 dB
[   16.846407] xc5000: *** Total gain = 211.80 dB
[   16.846415] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.854424] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000
[   17.069671] xc5000: firmware read 16497 bytes.
[   17.069674] xc5000: waiting for firmware upload (dvb-fe-xc5000c-4.1.30.7.fw)...
[   17.069675] xc5000: firmware uploading...
[   17.069676] xc5000: xc5000_tuner_reset()
[   17.233930] init: failsafe main process (699) killed by TERM signal
[   17.600148] Bluetooth: Core ver 2.17
[   17.600165] NET: Registered protocol family 31
[   17.600167] Bluetooth: HCI device and connection manager initialized
[   17.600174] Bluetooth: HCI socket layer initialized
[   17.600177] Bluetooth: L2CAP socket layer initialized
[   17.600182] Bluetooth: SCO socket layer initialized
[   17.603059] Bluetooth: RFCOMM TTY layer initialized
[   17.603069] Bluetooth: RFCOMM socket layer initialized
[   17.603073] Bluetooth: RFCOMM ver 1.11
[   17.603262] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.603264] Bluetooth: BNEP filters: protocol multicast
[   17.603269] Bluetooth: BNEP socket layer initialized
[   18.194844] init: cups main process (782) killed by HUP signal
[   18.194852] init: cups main process ended, respawning
[   19.361852] xc5000: Firmware upload complete...
[   19.393848] xc5000: xc_initialize()
[   19.725791] xc5000: Firmware dvb-fe-xc5000c-4.1.30.7.fw loaded and running.
[   19.725798] xc5000: xc_set_signal_source(1) Source = CABLE
[   19.741778] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   19.741782] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   19.789750] xc5000: xc_tune_channel(400000000)
[   19.789754] xc5000: xc_set_rf_frequency(400000000)
[   19.808564] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
[   19.809114] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   19.854468] init: samba-ad-dc main process (813) terminated with status 1
[   20.517581] xc5000: *** ADC envelope (0-1023) = 436
[   20.525581] xc5000: *** Frequency error = 31 Hz
[   20.533602] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   20.549601] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   20.557568] xc5000: *** Horizontal sync frequency = 15961 Hz
[   20.565593] xc5000: *** Frame lines = 740
[   20.573591] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   20.581591] xc5000: *** Unweighted analog SNR = 0 dB
[   20.589582] xc5000: *** Total gain = 124.18 dB
[   20.597563] xc5000: *** PLL lock status = 0x0000
[   20.653547] Registered IR keymap rc-behold
[   20.653601] input: i2c IR (BeholdTV) as /devices/virtual/rc/rc0/input11
[   20.653640] rc0: i2c IR (BeholdTV) as /devices/virtual/rc/rc0
[   20.653641] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-9/9-002d/ir0 [saa7133[0]]
[   20.653895] xc5000: xc5000_sleep()
[   20.653951] saa7133[0]: registered device video0 [v4l2]
[   20.653984] saa7133[0]: registered device vbi0
[   20.654013] saa7133[0]: registered device radio0
[   20.655834] saa7134 ALSA driver for DMA sound loaded
[   20.655861] saa7133[0]/alsa: saa7133[0] at 0xfbdff000 irq 17 registered as card -2
[   20.656497] WARNING: You are using an experimental version of the media stack.
[   20.656497] 	As the driver is backported to an older kernel, it doesn't offer
[   20.656497] 	enough quality for its usage in production.
[   20.656497] 	Use it with care.
[   20.656497] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   20.656497] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   20.656497] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   20.656497] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   20.657037] dvb_init() allocating 1 frontend
[   20.660148] i2c i2c-9: Added multiplexed i2c bus 10
[   20.660152] si2168 9-0064: Silicon Labs Si2168 successfully attached
[   20.660165] xc5000: xc5000_attach(9-0061)
[   20.660167] xc5000 9-0061: attaching existing instance
[   20.662045] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   20.665576] xc5000: XREG_PRODUCT_ID 14b4
[   20.665583] xc5000: Successfully identified at address 0x61
[   20.665585] xc5000: Firmware has been loaded previously
[   20.665589] DVB: registering new adapter (saa7133[0])
[   20.665596] saa7134 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[   20.673547] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   20.673550] xc5000: xc_set_signal_source(1) Source = CABLE
[   20.705559] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   20.705563] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   20.761531] si2168 9-0064: found a 'Silicon Labs Si2168-A30 build 2 id 0'
[   20.785542] xc5000: xc_tune_channel(400000000)
[   20.785546] xc5000: xc_set_rf_frequency(400000000)
[   20.865594] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-a30b2-01.fw'
[   21.513368] xc5000: *** ADC envelope (0-1023) = 404
[   21.529387] xc5000: *** Frequency error = 31 Hz
[   21.545374] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   21.581385] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   21.597373] xc5000: *** Horizontal sync frequency = 15710 Hz
[   21.613369] xc5000: *** Frame lines = 65535
[   21.629340] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   21.645350] xc5000: *** Unweighted analog SNR = 63 dB
[   21.665361] xc5000: *** Total gain = 124.18 dB
[   21.681328] xc5000: *** PLL lock status = 0x0001
[   21.713412] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   21.729321] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   21.729325] xc5000: xc_set_signal_source(1) Source = CABLE
[   21.761316] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   21.761319] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   21.857303] xc5000: xc_tune_channel(400000000)
[   21.857306] xc5000: xc_set_rf_frequency(400000000)
[   22.400064] vboxdrv: Found 4 processor cores.
[   22.400210] vboxdrv: fAsync=0 offMin=0x217 offMax=0xc05
[   22.400284] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   22.400286] vboxdrv: Successfully loaded version 4.3.26 (interface 0x001a000a).
[   22.585157] xc5000: *** ADC envelope (0-1023) = 388
[   22.601197] xc5000: *** Frequency error = 296 Hz
[   22.610828] vboxpci: IOMMU not found (not registered)
[   22.617160] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   22.649131] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   22.665181] xc5000: *** Horizontal sync frequency = 15359 Hz
[   22.681137] xc5000: *** Frame lines = 65535
[   22.697143] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   22.713136] xc5000: *** Unweighted analog SNR = 63 dB
[   22.724429] init: plymouth-upstart-bridge main process ended, respawning
[   22.729118] xc5000: *** Total gain = 124.18 dB
[   22.730233] init: plymouth-upstart-bridge main process (1617) terminated with status 1
[   22.730241] init: plymouth-upstart-bridge main process ended, respawning
[   22.749119] xc5000: *** PLL lock status = 0x0001
[   22.781283] xc5000: xc5000_config_radio() frequency=1400000 (in units of khz)
[   22.797116] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   22.797124] xc5000: xc_set_tv_standard(0x9002,0x0208)
[   22.797128] xc5000: xc_set_tv_standard() Standard = FM Radio-INPUT1
[   22.861082] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   22.925057] xc5000: xc_tune_channel(87500000)
[   22.925061] xc5000: xc_set_rf_frequency(87500000)
[   22.963438] init: plymouth-stop pre-start process (1665) terminated with status 1
[   23.237055] xc5000: xc5000_sleep()
[   23.237783] xc5000: xc5000_sleep()
[   23.238815] xc5000: xc5000_sleep()
[   28.243884] xc5000: xc5000_do_timer_sleep()
[   28.243889] xc5000: xc5000_tuner_reset()
[   28.247979] si2168 9-0064: firmware download failed -5
[   28.248049] xc5000: xc5000_sleep()
[   33.250336] xc5000: xc5000_do_timer_sleep()
[   33.250341] xc5000: xc5000_tuner_reset()
user@Andrey-Linux ~ $ 
