[    0.547965] intel_idle: v0.4 model 0x2A
[    0.547966] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.548031] ipmi message handler version 39.2
[    0.548071] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.548074] ACPI: Power Button [PWRB]
[    0.548099] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.548100] ACPI: Power Button [PWRF]
[    0.548549] GHES: HEST is not enabled!
[    0.548608] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.569014] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.569891] Linux agpgart interface v0.103
[    0.570754] brd: module loaded
[    0.571181] loop: module loaded
[    0.571254] ata_piix 0000:00:1f.2: version 2.13
[    0.571316] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.726620] scsi0 : ata_piix
[    0.726713] scsi1 : ata_piix
[    0.726746] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
[    0.726750] ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
[    0.726827] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.727232] scsi2 : ata_piix
[    0.727360] scsi3 : ata_piix
[    0.727393] ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    0.727396] ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[    0.727585] libphy: Fixed MDIO Bus: probed
[    0.727636] tun: Universal TUN/TAP device driver, 1.6
[    0.727637] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.727700] PPP generic driver version 2.4.2
[    0.727760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.727763] ehci-pci: EHCI PCI platform driver
[    0.727840] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.727844] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.727856] ehci-pci 0000:00:1a.0: debug port 2
[    0.731767] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[    0.731783] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    0.742147] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.742209] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.742211] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.742212] usb usb1: Product: EHCI Host Controller
[    0.742214] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.742215] usb usb1: SerialNumber: 0000:00:1a.0
[    0.742313] hub 1-0:1.0: USB hub found
[    0.742318] hub 1-0:1.0: 2 ports detected
[    0.742442] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.742446] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.742456] ehci-pci 0000:00:1d.0: debug port 2
[    0.746351] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    0.746364] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    0.758138] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.758168] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758170] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758171] usb usb2: Product: EHCI Host Controller
[    0.758172] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.758173] usb usb2: SerialNumber: 0000:00:1d.0
[    0.758322] hub 2-0:1.0: USB hub found
[    0.758328] hub 2-0:1.0: 2 ports detected
[    0.758391] ehci-platform: EHCI generic platform driver
[    0.758397] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.758398] ohci-pci: OHCI PCI platform driver
[    0.758403] ohci-platform: OHCI generic platform driver
[    0.758407] uhci_hcd: USB Universal Host Controller Interface driver
[    0.758459] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758463] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.758602] xhci_hcd 0000:04:00.0: irq 40 for MSI/MSI-X
[    0.758669] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758671] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758672] usb usb3: Product: xHCI Host Controller
[    0.758673] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758674] usb usb3: SerialNumber: 0000:04:00.0
[    0.758846] hub 3-0:1.0: USB hub found
[    0.758855] hub 3-0:1.0: 2 ports detected
[    0.758905] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758908] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.758937] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.758938] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758939] usb usb4: Product: xHCI Host Controller
[    0.758941] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758942] usb usb4: SerialNumber: 0000:04:00.0
[    0.759087] hub 4-0:1.0: USB hub found
[    0.759097] hub 4-0:1.0: 2 ports detected
[    0.766276] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.766691] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.766696] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.766958] mousedev: PS/2 mouse device common for all mice
[    0.767380] rtc_cmos 00:03: RTC can wake from S4
[    0.767594] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.767620] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.767666] device-mapper: uevent: version 1.0.3
[    0.767719] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.767724] ledtrig-cpu: registered to indicate activity on CPUs
[    0.767793] TCP: cubic registered
[    0.767853] NET: Registered protocol family 10
[    0.767976] NET: Registered protocol family 17
[    0.767983] Key type dns_resolver registered
[    0.768262] Loading compiled-in X.509 certificates
[    0.768972] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    0.768981] registered taskstats version 1
[    0.770534] Key type trusted registered
[    0.771765] Key type encrypted registered
[    0.772961] AppArmor: AppArmor sha1 policy hashing enabled
[    0.772964] IMA: No TPM chip found, activating TPM-bypass!
[    0.773195] regulator-dummy: disabling
[    0.773235]   Magic number: 7:860:549
[    0.773251] tty ttyS25: hash matches
[    0.773257] clockevents clockevent0: hash matches
[    0.773270] acpi PNP0C0F:00: hash matches
[    0.773328] rtc_cmos 00:03: setting system clock to 2015-07-02 21:31:23 UTC (1435872683)
[    0.773798] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.773799] EDD information not available.
[    0.773818] PM: Hibernation image not present or could not be loaded.
[    0.790405] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.054115] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.186388] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.186392] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.186676] hub 1-1:1.0: USB hub found
[    1.186755] hub 1-1:1.0: 4 ports detected
[    1.202111] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.202215] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.210288] ata4.00: ATAPI: ASUS    DRW-24B3ST, 1.00, max UDMA/100
[    1.210349] ata3.00: ATAPI: ASUS    DRW-24B5ST, 1.00, max UDMA/100
[    1.226276] ata4.00: configured for UDMA/100
[    1.226326] ata3.00: configured for UDMA/100
[    1.298103] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.430324] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.430329] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.430618] hub 2-1:1.0: USB hub found
[    1.430697] hub 2-1:1.0: 6 ports detected
[    1.521987] tsc: Refined TSC clocksource calibration: 3092.974 MHz
[    1.701994] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.983073] usb 2-1.3: New USB device found, idVendor=048d, idProduct=1336
[    1.983077] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.983080] usb 2-1.3: Product: Mass Storage Device
[    1.983083] usb 2-1.3: Manufacturer: Generic   
[    1.983085] usb 2-1.3: SerialNumber: 00000000000006
[    2.073868] ata1.01: failed to resume link (SControl 0)
[    2.073940] ata2.01: failed to resume link (SControl 0)
[    2.084676] ata2.00: SATA link down (SStatus 0 SControl 300)
[    2.084688] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.229897] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.229908] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.238630] ata1.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max UDMA/133
[    2.238634] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.246637] ata1.00: configured for UDMA/133
[    2.246842] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68J 01.0 PQ: 0 ANSI: 5
[    2.246940] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.246943] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.246944] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.247043] sd 0:0:0:0: [sda] Write Protect is off
[    2.247046] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.247087] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.250322] scsi 2:0:0:0: CD-ROM            ASUS     DRW-24B5ST       1.00 PQ: 0 ANSI: 5
[    2.254169] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.254171] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.254236] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.254291] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.257799] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24B3ST       1.00 PQ: 0 ANSI: 5
[    2.261495] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.261658] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    2.261706] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    2.265306]  sda: sda1 sda2 sda3
[    2.265718] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.266770] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    2.266772] Write protecting the kernel read-only data: 12288k
[    2.268318] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    2.269612] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    2.279182] systemd-udevd[135]: starting version 204
[    2.296924] [drm] Initialized drm 1.1.0 20060810
[    2.299225] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[    2.299287] scsi4 : usb-storage 2-1.3:1.0
[    2.299359] usbcore: registered new interface driver usb-storage
[    2.323696] [drm] Memory usable by graphics device = 2048M
[    2.331463] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
[    2.361819] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    2.361828] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.361829] [drm] Driver supports precise vblank timestamp query.
[    2.361884] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.379400] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.379403] [drm] This can cause pipe underruns and display issues.
[    2.379403] [drm] Please upgrade your BIOS to fix this.
[    2.408347] fbcon: inteldrmfb (fb0) is primary device
[    2.521905] Switched to clocksource tsc
[    2.592192] Console: switching to colour frame buffer device 160x64
[    2.594575] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.594576] i915 0000:00:02.0: registered panic notifier
[    2.594609] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.714075] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    3.082298] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.298369] scsi 4:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[    3.298556] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.299750] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.480029] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    3.701724] random: nonblocking pool is initialized
[    3.813479] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   16.151565] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.230443] systemd-udevd[380]: starting version 204
[   16.350261] media: module verification failed: signature and/or  required key missing - tainting kernel
[   16.350481] media: Linux media interface: v0.10
[   16.351379] Linux video capture interface: v2.00
[   16.351383] WARNING: You are using an experimental version of the media stack.
[   16.351383] 	As the driver is backported to an older kernel, it doesn't offer
[   16.351383] 	enough quality for its usage in production.
[   16.351383] 	Use it with care.
[   16.351383] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.351383] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.351383] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.351383] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.352290] WARNING: You are using an experimental version of the media stack.
[   16.352290] 	As the driver is backported to an older kernel, it doesn't offer
[   16.352290] 	enough quality for its usage in production.
[   16.352290] 	Use it with care.
[   16.352290] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.352290] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.352290] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.352290] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.358470] lp: driver loaded but no devices found
[   16.360794] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   16.365154] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   16.365360] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 17, latency: 32, mmio: 0xfbdff000
[   16.365369] saa7133[0]: subsystem: 5ace:7290, board: Beholder BeholdTV T7 [card=194,autodetected]
[   16.365384] saa7133[0]: board init: gpio is 0
[   16.366300] ppdev: user-space parallel port driver
[   16.369556] parport_pc 00:07: reported by Plug and Play ACPI
[   16.369612] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.382028] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[   16.382035] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.382085] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.466835] lp0: using parport0 (interrupt-driven).
[   16.474233] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.500555] device-mapper: multipath: version 1.6.0 loaded
[   16.506675] saa7133[0]: i2c eeprom 00: ce 5a 90 72 54 20 00 00 00 00 00 00 00 00 00 01
[   16.506684] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506691] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506698] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506705] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506712] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506718] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506726] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506733] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506740] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506747] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506754] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506761] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506768] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506775] saa7133[0]: i2c eeprom e0: a7 1f 01 00 ff ff ff ff ff ff ff ff ff ff ff ff
[   16.506782] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[   16.515689] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   16.522712] tuner 9-0061: Tuner -1 found with type(s) Radio TV.
[   16.525215] xc5000: xc5000_attach(9-0061)
[   16.525219] xc5000 9-0061: creating new instance
[   16.529251] SKU: Nid=0x1d sku_cfg=0x4005e601
[   16.529254] SKU: port_connectivity=0x1
[   16.529254] SKU: enable_pcbeep=0x0
[   16.529255] SKU: check_sum=0x00000005
[   16.529256] SKU: customization=0x000000e6
[   16.529257] SKU: external_amp=0x0
[   16.529257] SKU: platform_type=0x0
[   16.529258] SKU: swap=0x0
[   16.529259] SKU: override=0x1
[   16.529532] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   16.529533]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.529534]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.529535]    mono: mono_out=0x0
[   16.529535]    inputs:
[   16.529537]      Rear Mic=0x18
[   16.529538]      Front Mic=0x19
[   16.529539]      Line=0x1a
[   16.529540]      CD=0x1c
[   16.529541] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   16.529542] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   16.530672] xc5000: XREG_PRODUCT_ID 2000
[   16.530678] xc5000: Successfully identified at address 0x61
[   16.530679] xc5000: Firmware has not been loaded previously
[   16.530685] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.538669] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20
[   16.538677] xc5000: xc_set_signal_source(1) Source = CABLE
[   16.545133] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.545222] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.545283] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.545337] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.545394] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.545446] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   16.554663] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   16.554667] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   16.593116] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   16.602803] xc5000: xc_tune_channel(400000000)
[   16.602807] xc5000: xc_set_rf_frequency(400000000)
[   16.750641] xc5000: *** ADC envelope (0-1023) = 1540
[   16.758642] xc5000: *** Frequency error = 0 Hz
[   16.766644] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2814
[   16.782617] xc5000: *** HW: V0.0, FW: V 0.0.0
[   16.790604] xc5000: *** Horizontal sync frequency = 7416 Hz
[   16.798616] xc5000: *** Frame lines = 24532
[   16.806603] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   16.814597] xc5000: *** Unweighted analog SNR = 56 dB
[   16.822596] xc5000: *** Total gain = 211.80 dB
[   16.822600] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.830603] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000
[   17.061087] xc5000: firmware read 16497 bytes.
[   17.061090] xc5000: waiting for firmware upload (dvb-fe-xc5000c-4.1.30.7.fw)...
[   17.061091] xc5000: firmware uploading...
[   17.061092] xc5000: xc5000_tuner_reset()
[   17.345829] init: failsafe main process (706) killed by TERM signal
[   17.691237] Bluetooth: Core ver 2.17
[   17.691254] NET: Registered protocol family 31
[   17.691256] Bluetooth: HCI device and connection manager initialized
[   17.691262] Bluetooth: HCI socket layer initialized
[   17.691264] Bluetooth: L2CAP socket layer initialized
[   17.691267] Bluetooth: SCO socket layer initialized
[   17.693685] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.693687] Bluetooth: BNEP filters: protocol multicast
[   17.693695] Bluetooth: BNEP socket layer initialized
[   17.697343] Bluetooth: RFCOMM TTY layer initialized
[   17.697353] Bluetooth: RFCOMM socket layer initialized
[   17.697356] Bluetooth: RFCOMM ver 1.11
[   18.181671] init: cups main process (778) killed by HUP signal
[   18.181680] init: cups main process ended, respawning
[   19.342061] xc5000: Firmware upload complete...
[   19.374061] xc5000: xc_initialize()
[   19.705980] xc5000: Firmware dvb-fe-xc5000c-4.1.30.7.fw loaded and running.
[   19.705987] xc5000: xc_set_signal_source(1) Source = CABLE
[   19.721970] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   19.721975] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   19.769956] xc5000: xc_tune_channel(400000000)
[   19.769960] xc5000: xc_set_rf_frequency(400000000)
[   19.878603] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
[   19.879153] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   20.016177] init: samba-ad-dc main process (814) terminated with status 1
[   20.497792] xc5000: *** ADC envelope (0-1023) = 340
[   20.505813] xc5000: *** Frequency error = 46 Hz
[   20.513794] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   20.529810] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   20.537806] xc5000: *** Horizontal sync frequency = 15672 Hz
[   20.545802] xc5000: *** Frame lines = 65535
[   20.553778] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   20.561808] xc5000: *** Unweighted analog SNR = 63 dB
[   20.569793] xc5000: *** Total gain = 124.18 dB
[   20.577806] xc5000: *** PLL lock status = 0x0000
[   20.633765] Registered IR keymap rc-behold
[   20.633839] input: i2c IR (BeholdTV) as /devices/virtual/rc/rc0/input11
[   20.633889] rc0: i2c IR (BeholdTV) as /devices/virtual/rc/rc0
[   20.633891] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-9/9-002d/ir0 [saa7133[0]]
[   20.634143] xc5000: xc5000_sleep()
[   20.634192] saa7133[0]: registered device video0 [v4l2]
[   20.634232] saa7133[0]: registered device vbi0
[   20.634734] saa7133[0]: registered device radio0
[   20.636246] saa7134 ALSA driver for DMA sound loaded
[   20.636275] saa7133[0]/alsa: saa7133[0] at 0xfbdff000 irq 17 registered as card -2
[   20.637801] WARNING: You are using an experimental version of the media stack.
[   20.637801] 	As the driver is backported to an older kernel, it doesn't offer
[   20.637801] 	enough quality for its usage in production.
[   20.637801] 	Use it with care.
[   20.637801] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   20.637801] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   20.637801] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   20.637801] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   20.638349] dvb_init() allocating 1 frontend
[   20.641430] i2c i2c-9: Added multiplexed i2c bus 10
[   20.641435] si2168 9-0064: Silicon Labs Si2168 successfully attached
[   20.641446] xc5000: xc5000_attach(9-0061)
[   20.641448] xc5000 9-0061: attaching existing instance
[   20.645507] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   20.649771] xc5000: XREG_PRODUCT_ID 14b4
[   20.649776] xc5000: Successfully identified at address 0x61
[   20.649778] xc5000: Firmware has been loaded previously
[   20.649783] DVB: registering new adapter (saa7133[0])
[   20.649791] saa7134 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[   20.657766] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   20.657770] xc5000: xc_set_signal_source(1) Source = CABLE
[   20.689777] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   20.689782] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   20.745738] si2168 9-0064: found a 'Silicon Labs Si2168-A30 build 2 id 0'
[   20.768030] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-a30b2-01.fw'
[   20.769753] xc5000: xc_tune_channel(400000000)
[   20.769758] xc5000: xc_set_rf_frequency(400000000)
[   21.529567] xc5000: *** ADC envelope (0-1023) = 328
[   21.545570] xc5000: *** Frequency error = 109 Hz
[   21.561586] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   21.593564] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   21.609558] xc5000: *** Horizontal sync frequency = 15694 Hz
[   21.625552] xc5000: *** Frame lines = 65535
[   21.641544] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   21.657541] xc5000: *** Unweighted analog SNR = 63 dB
[   21.673735] xc5000: *** Total gain = 124.18 dB
[   21.689535] xc5000: *** PLL lock status = 0x0000
[   21.721644] xc5000: xc5000_sleep()
[   21.721681] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   21.737552] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   21.737557] xc5000: xc_set_signal_source(1) Source = CABLE
[   21.769519] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   21.769524] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   21.869492] xc5000: xc_tune_channel(400000000)
[   21.869496] xc5000: xc_set_rf_frequency(400000000)
[   22.281375] vboxdrv: Found 4 processor cores.
[   22.282873] vboxdrv: fAsync=0 offMin=0x1e2 offMax=0xfaa
[   22.283264] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   22.283267] vboxdrv: Successfully loaded version 4.3.26 (interface 0x001a000a).
[   22.493075] vboxpci: IOMMU not found (not registered)
[   22.613417] xc5000: *** ADC envelope (0-1023) = 328
[   22.629412] xc5000: *** Frequency error = 265 Hz
[   22.645330] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   22.677399] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   22.693400] xc5000: *** Horizontal sync frequency = 15687 Hz
[   22.708619] init: plymouth-upstart-bridge main process ended, respawning
[   22.709330] xc5000: *** Frame lines = 65535
[   22.714336] init: plymouth-upstart-bridge main process (1631) terminated with status 1
[   22.714347] init: plymouth-upstart-bridge main process ended, respawning
[   22.725315] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   22.741329] xc5000: *** Unweighted analog SNR = 63 dB
[   22.757306] xc5000: *** Total gain = 124.18 dB
[   22.773346] xc5000: *** PLL lock status = 0x0001
[   22.813439] xc5000: xc5000_config_radio() frequency=1400000 (in units of khz)
[   22.829298] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   22.829305] xc5000: xc_set_tv_standard(0x9002,0x0208)
[   22.829307] xc5000: xc_set_tv_standard() Standard = FM Radio-INPUT1
[   22.871514] init: plymouth-stop pre-start process (1674) terminated with status 1
[   22.897280] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   22.961275] xc5000: xc_tune_channel(87500000)
[   22.961283] xc5000: xc_set_rf_frequency(87500000)
[   23.273275] xc5000: xc5000_sleep()
[   23.273402] xc5000: xc5000_sleep()
[   28.276081] xc5000: xc5000_do_timer_sleep()
[   28.276085] xc5000: xc5000_tuner_reset()
[   28.276137] si2168 9-0064: firmware download failed -5
[   28.276205] xc5000: xc5000_sleep()
[   33.283512] xc5000: xc5000_do_timer_sleep()
[   33.283518] xc5000: xc5000_tuner_reset()
user@Andrey-Linux ~ $ 
