[    2.265732] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24B3ST       1.00 PQ: 0 ANSI: 5
[    2.269406] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.269592] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    2.269640] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    2.287198]  sda: sda1 sda2 sda3
[    2.287847] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.288895] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    2.288897] Write protecting the kernel read-only data: 12288k
[    2.290448] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    2.291754] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    2.301159] systemd-udevd[135]: starting version 204
[    2.315727] [drm] Initialized drm 1.1.0 20060810
[    2.320213] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[    2.320570] scsi4 : usb-storage 2-1.3:1.0
[    2.320630] usbcore: registered new interface driver usb-storage
[    2.337998] [drm] Memory usable by graphics device = 2048M
[    2.351014] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
[    2.377731] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    2.377741] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.377742] [drm] Driver supports precise vblank timestamp query.
[    2.377793] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.395357] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.395360] [drm] This can cause pipe underruns and display issues.
[    2.395361] [drm] Please upgrade your BIOS to fix this.
[    2.420171] fbcon: inteldrmfb (fb0) is primary device
[    2.521799] Switched to clocksource tsc
[    2.596103] Console: switching to colour frame buffer device 160x64
[    2.598490] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.598491] i915 0000:00:02.0: registered panic notifier
[    2.598523] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.726548] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    2.993207] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.318302] scsi 4:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[    3.318507] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.319893] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.491972] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    3.666161] random: init urandom read with 127 bits of entropy available
[    3.696143] random: nonblocking pool is initialized
[    3.789403] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   15.995897] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.041304] systemd-udevd[379]: starting version 204
[   16.210003] lp: driver loaded but no devices found
[   16.223038] ppdev: user-space parallel port driver
[   16.226924] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   16.227014] parport_pc 00:07: reported by Plug and Play ACPI
[   16.227063] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.231432] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.251155] media: module verification failed: signature and/or  required key missing - tainting kernel
[   16.251377] media: Linux media interface: v0.10
[   16.252362] Linux video capture interface: v2.00
[   16.252365] WARNING: You are using an experimental version of the media stack.
[   16.252365] 	As the driver is backported to an older kernel, it doesn't offer
[   16.252365] 	enough quality for its usage in production.
[   16.252365] 	Use it with care.
[   16.252365] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.252365] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.252365] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.252365] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.253318] WARNING: You are using an experimental version of the media stack.
[   16.253318] 	As the driver is backported to an older kernel, it doesn't offer
[   16.253318] 	enough quality for its usage in production.
[   16.253318] 	Use it with care.
[   16.253318] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.253318] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.253318] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.253318] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.260362] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   16.260588] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 17, latency: 32, mmio: 0xfbdff000
[   16.260599] saa7133[0]: subsystem: 5ace:7290, board: Beholder BeholdTV T7 [card=194,autodetected]
[   16.260612] saa7133[0]: board init: gpio is 0
[   16.266300] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[   16.266308] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.266347] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.328611] lp0: using parport0 (interrupt-driven).
[   16.345991] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   16.349280] device-mapper: multipath: version 1.6.0 loaded
[   16.361974] SKU: Nid=0x1d sku_cfg=0x4005e601
[   16.361976] SKU: port_connectivity=0x1
[   16.361977] SKU: enable_pcbeep=0x0
[   16.361978] SKU: check_sum=0x00000005
[   16.361979] SKU: customization=0x000000e6
[   16.361979] SKU: external_amp=0x0
[   16.361980] SKU: platform_type=0x0
[   16.361981] SKU: swap=0x0
[   16.361981] SKU: override=0x1
[   16.362265] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   16.362266]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.362267]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.362267]    mono: mono_out=0x0
[   16.362268]    inputs:
[   16.362269]      Rear Mic=0x18
[   16.362270]      Front Mic=0x19
[   16.362271]      Line=0x1a
[   16.362272]      CD=0x1c
[   16.362273] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   16.362274] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   16.376294] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.376376] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.376445] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.376515] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.376573] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.376638] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   16.386616] saa7133[0]: i2c eeprom 00: ce 5a 90 72 54 20 00 00 00 00 00 00 00 00 00 01
[   16.386625] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386630] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386635] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386639] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386644] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386648] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386653] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386657] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386662] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386666] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386671] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386675] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386680] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386685] saa7133[0]: i2c eeprom e0: a7 1f 01 00 ff ff ff ff ff ff ff ff ff ff ff ff
[   16.386689] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[   16.394671] tuner 9-0061: Tuner -1 found with type(s) Radio TV.
[   16.398778] xc5000: xc5000_attach(9-0061)
[   16.398781] xc5000 9-0061: creating new instance
[   16.406610] xc5000: XREG_PRODUCT_ID 2000
[   16.406615] xc5000: Successfully identified at address 0x61
[   16.406616] xc5000: Firmware has not been loaded previously
[   16.406623] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.417393] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20
[   16.417397] xc5000: xc_set_signal_source(1) Source = CABLE
[   16.430635] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   16.430639] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   16.454465] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   16.486589] xc5000: xc_tune_channel(400000000)
[   16.486593] xc5000: xc_set_rf_frequency(400000000)
[   16.634562] xc5000: *** ADC envelope (0-1023) = 1540
[   16.642553] xc5000: *** Frequency error = 0 Hz
[   16.650546] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2814
[   16.666548] xc5000: *** HW: V0.0, FW: V 0.0.0
[   16.674550] xc5000: *** Horizontal sync frequency = 7378 Hz
[   16.682547] xc5000: *** Frame lines = 980
[   16.690558] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   16.698545] xc5000: *** Unweighted analog SNR = 58 dB
[   16.706544] xc5000: *** Total gain = 211.80 dB
[   16.706551] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.714549] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000
[   16.949733] xc5000: firmware read 16497 bytes.
[   16.949736] xc5000: waiting for firmware upload (dvb-fe-xc5000c-4.1.30.7.fw)...
[   16.949737] xc5000: firmware uploading...
[   16.949738] xc5000: xc5000_tuner_reset()
[   17.097250] init: failsafe main process (706) killed by TERM signal
[   17.448272] Bluetooth: Core ver 2.17
[   17.448293] NET: Registered protocol family 31
[   17.448295] Bluetooth: HCI device and connection manager initialized
[   17.448338] Bluetooth: HCI socket layer initialized
[   17.448341] Bluetooth: L2CAP socket layer initialized
[   17.448346] Bluetooth: SCO socket layer initialized
[   17.450889] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.450895] Bluetooth: BNEP filters: protocol multicast
[   17.450906] Bluetooth: BNEP socket layer initialized
[   17.452112] Bluetooth: RFCOMM TTY layer initialized
[   17.452121] Bluetooth: RFCOMM socket layer initialized
[   17.452127] Bluetooth: RFCOMM ver 1.11
[   17.920102] init: cups main process (782) killed by HUP signal
[   17.920110] init: cups main process ended, respawning
[   19.229983] xc5000: Firmware upload complete...
[   19.262000] xc5000: xc_initialize()
[   19.593912] xc5000: Firmware dvb-fe-xc5000c-4.1.30.7.fw loaded and running.
[   19.593917] xc5000: xc_set_signal_source(1) Source = CABLE
[   19.609901] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   19.609907] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   19.657905] xc5000: xc_tune_channel(400000000)
[   19.657909] xc5000: xc_set_rf_frequency(400000000)
[   19.662150] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
[   19.662700] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   19.667883] init: samba-ad-dc main process (813) terminated with status 1
[   20.385759] xc5000: *** ADC envelope (0-1023) = 472
[   20.393747] xc5000: *** Frequency error = 46 Hz
[   20.401722] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   20.417720] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   20.425717] xc5000: *** Horizontal sync frequency = 15771 Hz
[   20.433726] xc5000: *** Frame lines = 65535
[   20.441724] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   20.449716] xc5000: *** Unweighted analog SNR = 0 dB
[   20.457715] xc5000: *** Total gain = 124.18 dB
[   20.465745] xc5000: *** PLL lock status = 0x0000
[   20.521714] Registered IR keymap rc-behold
[   20.521794] input: i2c IR (BeholdTV) as /devices/virtual/rc/rc0/input11
[   20.521836] rc0: i2c IR (BeholdTV) as /devices/virtual/rc/rc0
[   20.521838] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-9/9-002d/ir0 [saa7133[0]]
[   20.522099] xc5000: xc5000_sleep()
[   20.522164] saa7133[0]: registered device video0 [v4l2]
[   20.522216] saa7133[0]: registered device vbi0
[   20.522261] saa7133[0]: registered device radio0
[   20.524070] WARNING: You are using an experimental version of the media stack.
[   20.524070] 	As the driver is backported to an older kernel, it doesn't offer
[   20.524070] 	enough quality for its usage in production.
[   20.524070] 	Use it with care.
[   20.524070] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   20.524070] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   20.524070] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   20.524070] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   20.524586] dvb_init() allocating 1 frontend
[   20.525560] saa7134 ALSA driver for DMA sound loaded
[   20.525589] saa7133[0]/alsa: saa7133[0] at 0xfbdff000 irq 17 registered as card -2
[   20.527216] i2c i2c-9: Added multiplexed i2c bus 10
[   20.527220] si2168 9-0064: Silicon Labs Si2168 successfully attached
[   20.527236] xc5000: xc5000_attach(9-0061)
[   20.527239] xc5000 9-0061: attaching existing instance
[   20.529798] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   20.533700] xc5000: XREG_PRODUCT_ID 14b4
[   20.533703] xc5000: Successfully identified at address 0x61
[   20.533704] xc5000: Firmware has been loaded previously
[   20.533707] DVB: registering new adapter (saa7133[0])
[   20.533712] saa7134 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[   20.541691] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   20.541695] xc5000: xc_set_signal_source(1) Source = CABLE
[   20.573693] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   20.573697] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   20.629717] si2168 9-0064: found a 'Silicon Labs Si2168-A30 build 2 id 0'
[   20.653710] xc5000: xc_tune_channel(400000000)
[   20.653716] xc5000: xc_set_rf_frequency(400000000)
[   20.690088] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-a30b2-01.fw'
[   21.385512] xc5000: *** ADC envelope (0-1023) = 644
[   21.402396] xc5000: *** Frequency error = 62 Hz
[   21.417508] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   21.449495] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   21.465493] xc5000: *** Horizontal sync frequency = 15786 Hz
[   21.481489] xc5000: *** Frame lines = 65535
[   21.497489] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   21.513545] xc5000: *** Unweighted analog SNR = 63 dB
[   21.529483] xc5000: *** Total gain = 124.18 dB
[   21.545478] xc5000: *** PLL lock status = 0x0001
[   21.577527] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   21.593462] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   21.593467] xc5000: xc_set_signal_source(1) Source = CABLE
[   21.625463] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   21.625468] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   21.721432] xc5000: xc_tune_channel(400000000)
[   21.721439] xc5000: xc_set_rf_frequency(400000000)
[   22.006809] vboxdrv: Found 4 processor cores.
[   22.007558] vboxdrv: fAsync=0 offMin=0x35e offMax=0x1756
[   22.007635] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   22.007637] vboxdrv: Successfully loaded version 4.3.26 (interface 0x001a000a).
[   22.217121] vboxpci: IOMMU not found (not registered)
[   22.441915] init: plymouth-upstart-bridge main process ended, respawning
[   22.448543] init: plymouth-upstart-bridge main process (1654) terminated with status 1
[   22.448555] init: plymouth-upstart-bridge main process ended, respawning
[   22.453282] xc5000: *** ADC envelope (0-1023) = 760
[   22.469268] xc5000: *** Frequency error = 31 Hz
[   22.485426] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   22.517314] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   22.533279] xc5000: *** Horizontal sync frequency = 15404 Hz
[   22.549281] xc5000: *** Frame lines = 65535
[   22.565257] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   22.580664] init: plymouth-stop pre-start process (1678) terminated with status 1
[   22.581341] xc5000: *** Unweighted analog SNR = 63 dB
[   22.597243] xc5000: *** Total gain = 124.18 dB
[   22.613258] xc5000: *** PLL lock status = 0x0001
[   22.645401] xc5000: xc5000_config_radio() frequency=1400000 (in units of khz)
[   22.661285] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   22.661290] xc5000: xc_set_tv_standard(0x9002,0x0208)
[   22.661292] xc5000: xc_set_tv_standard() Standard = FM Radio-INPUT1
[   22.725218] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   22.789241] xc5000: xc_tune_channel(87500000)
[   22.789248] xc5000: xc_set_rf_frequency(87500000)
[   23.105243] xc5000: xc5000_sleep()
[   23.105260] xc5000: xc5000_sleep()
[   23.105374] xc5000: xc5000_sleep()
[   59.030975] si2168 9-0064: wait 59 
[   60.034310] si2168 9-0064: wait 58 
[   61.037586] si2168 9-0064: wait 57 
[   62.040858] si2168 9-0064: wait 56 
[   63.044208] si2168 9-0064: wait 55 
[   64.047463] si2168 9-0064: wait 54 
[   65.050790] si2168 9-0064: wait 53 
[   66.054077] si2168 9-0064: wait 52 
[   67.057367] si2168 9-0064: wait 51 
[   68.060647] si2168 9-0064: wait 50 
[   69.063945] si2168 9-0064: wait 49 
[   70.067257] si2168 9-0064: wait 48 
[   71.070508] si2168 9-0064: wait 47 
[   72.073819] si2168 9-0064: wait 46 
[   72.337662] si2168 9-0064: firmware download took 51676 ms
[   72.369640] si2168 9-0064: firmware version: 3.0.20
[   72.441552] xc5000: xc5000_sleep()
[   73.077152] si2168 9-0064: wait 45 
[   73.125105] xc5000: xc5000_init()
[   73.133061] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   73.245002] xc5000: *** ADC envelope (0-1023) = 876
[   73.252974] xc5000: *** Frequency error = 0 Hz
[   73.260961] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[   73.276997] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   73.284944] xc5000: *** Horizontal sync frequency = 2845 Hz
[   73.292941] xc5000: *** Frame lines = 65535
[   73.300964] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   73.308927] xc5000: *** Unweighted analog SNR = 63 dB
[   73.316923] xc5000: *** Total gain = 92.25 dB
[   73.324948] xc5000: *** PLL lock status = 0x0001
[   73.332911] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   73.332916] xc5000: xc5000_set_digital_params() frequency=554000000 (Hz)
[   73.332918] xc5000: xc5000_set_digital_params() OFDM
[   73.332920] xc5000: xc5000_set_digital_params() frequency=554000000 (compensated to 551250000)
[   73.332922] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   73.348946] xc5000: xc_set_tv_standard(0x800b,0x00c0)
[   73.348950] xc5000: xc_set_tv_standard() Standard = DTV8
[   73.380926] xc5000: xc_set_IF_frequency(freq_khz = 5000) freq_code = 0x1400
[   73.396898] xc5000: xc5000_tune_digital() setting OUTPUT_AMP to 0x8a
[   73.412901] xc5000: xc_tune_channel(551250000)
[   73.412905] xc5000: xc_set_rf_frequency(551250000)
[   74.040461] xc5000: *** ADC envelope (0-1023) = 636
[   74.048421] xc5000: *** Frequency error = 0 Hz
[   74.056447] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[   74.072437] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   74.080406] xc5000: *** Horizontal sync frequency = 15504 Hz
[   74.088393] xc5000: *** Frame lines = 65535
[   74.096389] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   74.104414] xc5000: *** Unweighted analog SNR = 63 dB
[   74.112376] xc5000: *** Total gain = 87.89 dB
[   74.120371] xc5000: *** PLL lock status = 0x0001
[   76.342808] xc5000 9-0061: Total Gain: -87dB (22500)
[   78.049601] xc5000 9-0061: Total Gain: -87dB (22500)
[   79.804382] xc5000 9-0061: Total Gain: -87dB (22500)
[   81.747031] xc5000 9-0061: Total Gain: -87dB (22500)
[   82.580355] xc5000: xc5000_sleep()
[   82.686349] xc5000: xc5000_init()
[   82.694332] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   82.806283] xc5000: *** ADC envelope (0-1023) = 624
[   82.814245] xc5000: *** Frequency error = 0 Hz
[   82.822270] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[   82.838275] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   82.846253] xc5000: *** Horizontal sync frequency = 1426 Hz
[   82.854216] xc5000: *** Frame lines = 2012
[   82.862216] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   82.870236] xc5000: *** Unweighted analog SNR = 27 dB
[   82.878202] xc5000: *** Total gain = 88.3 dB
[   82.886195] xc5000: *** PLL lock status = 0x0001
[   82.894220] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   82.894225] xc5000: xc5000_set_digital_params() frequency=554000000 (Hz)
[   82.894227] xc5000: xc5000_set_digital_params() OFDM
[   82.894229] xc5000: xc5000_set_digital_params() frequency=554000000 (compensated to 551250000)
[   82.894231] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   82.910202] xc5000: xc_set_tv_standard(0x800b,0x00c0)
[   82.910206] xc5000: xc_set_tv_standard() Standard = DTV8
[   82.942190] xc5000: xc_set_IF_frequency(freq_khz = 5000) freq_code = 0x1400
[   82.958178] xc5000: xc5000_tune_digital() setting OUTPUT_AMP to 0x8a
[   82.974138] xc5000: xc_tune_channel(551250000)
[   82.974142] xc5000: xc_set_rf_frequency(551250000)
[   83.621712] xc5000: *** ADC envelope (0-1023) = 696
[   83.629672] xc5000: *** Frequency error = 0 Hz
[   83.637697] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[   83.653688] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   83.661657] xc5000: *** Horizontal sync frequency = 15565 Hz
[   83.669645] xc5000: *** Frame lines = 946
[   83.677643] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   83.685665] xc5000: *** Unweighted analog SNR = 63 dB
[   83.693627] xc5000: *** Total gain = 88.78 dB
[   83.701621] xc5000: *** PLL lock status = 0x0001
[   84.864839] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   84.864845] xc5000: xc5000_set_digital_params() frequency=554000000 (Hz)
[   84.864847] xc5000: xc5000_set_digital_params() OFDM
[   84.864849] xc5000: xc5000_set_digital_params() frequency=554000000 (compensated to 551250000)
[   84.864851] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   84.880826] xc5000: xc_set_tv_standard(0x800b,0x00c0)
[   84.880830] xc5000: xc_set_tv_standard() Standard = DTV8
[   84.912802] xc5000: xc_set_IF_frequency(freq_khz = 5000) freq_code = 0x1400
[   84.928761] xc5000: xc5000_tune_digital() setting OUTPUT_AMP to 0x8a
[   84.944780] xc5000: xc_tune_channel(551250000)
[   84.944784] xc5000: xc_set_rf_frequency(551250000)
[   85.572340] xc5000: *** ADC envelope (0-1023) = 700
[   85.580308] xc5000: *** Frequency error = 0 Hz
[   85.588295] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[   85.604316] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   85.612278] xc5000: *** Horizontal sync frequency = 15519 Hz
[   85.620273] xc5000: *** Frame lines = 552
[   85.628297] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   85.636268] xc5000: *** Unweighted analog SNR = 63 dB
[   85.644256] xc5000: *** Total gain = 88.78 dB
[   85.652280] xc5000: *** PLL lock status = 0x0001
[   86.815466] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   86.815472] xc5000: xc5000_set_digital_params() frequency=554000000 (Hz)
[   86.815474] xc5000: xc5000_set_digital_params() OFDM
[   86.815476] xc5000: xc5000_set_digital_params() frequency=554000000 (compensated to 551250000)
[   86.815478] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   86.831454] xc5000: xc_set_tv_standard(0x800b,0x00c0)
[   86.831458] xc5000: xc_set_tv_standard() Standard = DTV8
[   86.863432] xc5000: xc_set_IF_frequency(freq_khz = 5000) freq_code = 0x1400
[   86.879419] xc5000: xc5000_tune_digital() setting OUTPUT_AMP to 0x8a
[   86.895380] xc5000: xc_tune_channel(551250000)
[   86.895384] xc5000: xc_set_rf_frequency(551250000)
[   87.522968] xc5000: *** ADC envelope (0-1023) = 704
[   87.530938] xc5000: *** Frequency error = 0 Hz
[   87.538924] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[   87.554947] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   87.562907] xc5000: *** Horizontal sync frequency = 15641 Hz
[   87.570932] xc5000: *** Frame lines = 65535
[   87.578922] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   87.586904] xc5000: *** Unweighted analog SNR = 63 dB
[   87.594905] xc5000: *** Total gain = 88.78 dB
[   87.602893] xc5000: *** PLL lock status = 0x0001
[   88.766095] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   88.766101] xc5000: xc5000_set_digital_params() frequency=554000000 (Hz)
[   88.766103] xc5000: xc5000_set_digital_params() OFDM
[   88.766105] xc5000: xc5000_set_digital_params() frequency=554000000 (compensated to 551250000)
[   88.766115] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   88.782058] xc5000: xc_set_tv_standard(0x800b,0x00c0)
[   88.782064] xc5000: xc_set_tv_standard() Standard = DTV8
[   88.814061] xc5000: xc_set_IF_frequency(freq_khz = 5000) freq_code = 0x1400
[   88.830049] xc5000: xc5000_tune_digital() setting OUTPUT_AMP to 0x8a
[   88.846042] xc5000: xc_tune_channel(551250000)
[   88.846046] xc5000: xc_set_rf_frequency(551250000)
[   89.473581] xc5000: *** ADC envelope (0-1023) = 672
[   89.481590] xc5000: *** Frequency error = 0 Hz
[   89.489596] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[   89.505563] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   89.513557] xc5000: *** Horizontal sync frequency = 14870 Hz
[   89.521544] xc5000: *** Frame lines = 65535
[   89.529539] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   89.537563] xc5000: *** Unweighted analog SNR = 63 dB
[   89.545528] xc5000: *** Total gain = 88.64 dB
[   89.553521] xc5000: *** PLL lock status = 0x0001
[   90.716724] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   90.716729] xc5000: xc5000_set_digital_params() frequency=554000000 (Hz)
[   90.716731] xc5000: xc5000_set_digital_params() OFDM
[   90.716733] xc5000: xc5000_set_digital_params() frequency=554000000 (compensated to 551250000)
[   90.716735] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   90.732683] xc5000: xc_set_tv_standard(0x800b,0x00c0)
[   90.732687] xc5000: xc_set_tv_standard() Standard = DTV8
[   90.764689] xc5000: xc_set_IF_frequency(freq_khz = 5000) freq_code = 0x1400
[   90.780651] xc5000: xc5000_tune_digital() setting OUTPUT_AMP to 0x8a
[   90.796666] xc5000: xc_tune_channel(551250000)
[   90.796670] xc5000: xc_set_rf_frequency(551250000)
[   91.444209] xc5000: *** ADC envelope (0-1023) = 600
[   91.452188] xc5000: *** Frequency error = 0 Hz
[   91.460182] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[   91.476189] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   91.484170] xc5000: *** Horizontal sync frequency = 15908 Hz
[   91.492189] xc5000: *** Frame lines = 65535
[   91.500153] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   91.508179] xc5000: *** Unweighted analog SNR = 63 dB
[   91.516172] xc5000: *** Total gain = 87.59 dB
[   91.524136] xc5000: *** PLL lock status = 0x0001
[   92.943139] xc5000 9-0061: Total Gain: -87dB (22424)
[   95.297503] xc5000 9-0061: Total Gain: -87dB (22424)
[   97.711779] xc5000 9-0061: Total Gain: -87dB (22424)
[  100.122116] xc5000 9-0061: Total Gain: -87dB (22424)
user@Andrey-Linux ~ $ 
