[    0.727359] ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    0.727362] ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[    0.727544] libphy: Fixed MDIO Bus: probed
[    0.727596] tun: Universal TUN/TAP device driver, 1.6
[    0.727597] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.727695] PPP generic driver version 2.4.2
[    0.727734] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.727737] ehci-pci: EHCI PCI platform driver
[    0.727817] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.727822] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.727833] ehci-pci 0000:00:1a.0: debug port 2
[    0.731718] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[    0.731730] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    0.742061] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.742116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.742118] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.742119] usb usb1: Product: EHCI Host Controller
[    0.742120] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.742122] usb usb1: SerialNumber: 0000:00:1a.0
[    0.742205] hub 1-0:1.0: USB hub found
[    0.742211] hub 1-0:1.0: 2 ports detected
[    0.742339] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.742344] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.742355] ehci-pci 0000:00:1d.0: debug port 2
[    0.746241] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    0.746251] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    0.758054] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.758112] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758113] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758115] usb usb2: Product: EHCI Host Controller
[    0.758116] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.758117] usb usb2: SerialNumber: 0000:00:1d.0
[    0.758192] hub 2-0:1.0: USB hub found
[    0.758197] hub 2-0:1.0: 2 ports detected
[    0.758256] ehci-platform: EHCI generic platform driver
[    0.758262] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.758263] ohci-pci: OHCI PCI platform driver
[    0.758269] ohci-platform: OHCI generic platform driver
[    0.758273] uhci_hcd: USB Universal Host Controller Interface driver
[    0.758325] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758329] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.758465] xhci_hcd 0000:04:00.0: irq 40 for MSI/MSI-X
[    0.758530] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758531] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758532] usb usb3: Product: xHCI Host Controller
[    0.758534] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758535] usb usb3: SerialNumber: 0000:04:00.0
[    0.758598] hub 3-0:1.0: USB hub found
[    0.758606] hub 3-0:1.0: 2 ports detected
[    0.758653] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758656] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.758684] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.758685] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758686] usb usb4: Product: xHCI Host Controller
[    0.758688] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758689] usb usb4: SerialNumber: 0000:04:00.0
[    0.758749] hub 4-0:1.0: USB hub found
[    0.758757] hub 4-0:1.0: 2 ports detected
[    0.766156] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.766567] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.766572] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.766805] mousedev: PS/2 mouse device common for all mice
[    0.767122] rtc_cmos 00:03: RTC can wake from S4
[    0.767310] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.767337] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.767384] device-mapper: uevent: version 1.0.3
[    0.767442] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.767447] ledtrig-cpu: registered to indicate activity on CPUs
[    0.767517] TCP: cubic registered
[    0.767575] NET: Registered protocol family 10
[    0.767696] NET: Registered protocol family 17
[    0.767702] Key type dns_resolver registered
[    0.767958] Loading compiled-in X.509 certificates
[    0.768665] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    0.768677] registered taskstats version 1
[    0.770287] Key type trusted registered
[    0.771545] Key type encrypted registered
[    0.772761] AppArmor: AppArmor sha1 policy hashing enabled
[    0.772764] IMA: No TPM chip found, activating TPM-bypass!
[    0.772995] regulator-dummy: disabling
[    0.773066]   Magic number: 7:883:490
[    0.773102] acpi PNP0F13:00: hash matches
[    0.773158] rtc_cmos 00:03: setting system clock to 2015-07-02 17:28:09 UTC (1435858089)
[    0.773599] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.773600] EDD information not available.
[    0.773619] PM: Hibernation image not present or could not be loaded.
[    0.791192] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.054016] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.186327] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.186332] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.186621] hub 1-1:1.0: USB hub found
[    1.186700] hub 1-1:1.0: 4 ports detected
[    1.202008] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.202111] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.210185] ata4.00: ATAPI: ASUS    DRW-24B3ST, 1.00, max UDMA/100
[    1.210246] ata3.00: ATAPI: ASUS    DRW-24B5ST, 1.00, max UDMA/100
[    1.226173] ata4.00: configured for UDMA/100
[    1.226223] ata3.00: configured for UDMA/100
[    1.298000] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.430271] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.430275] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.430575] hub 2-1:1.0: USB hub found
[    1.430650] hub 2-1:1.0: 6 ports detected
[    1.521882] tsc: Refined TSC clocksource calibration: 3092.974 MHz
[    1.701958] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.983034] usb 2-1.3: New USB device found, idVendor=048d, idProduct=1336
[    1.983038] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.983041] usb 2-1.3: Product: Mass Storage Device
[    1.983044] usb 2-1.3: Manufacturer: Generic   
[    1.983046] usb 2-1.3: SerialNumber: 00000000000006
[    2.073766] ata1.01: failed to resume link (SControl 0)
[    2.073837] ata2.01: failed to resume link (SControl 0)
[    2.084573] ata2.00: SATA link down (SStatus 0 SControl 300)
[    2.084585] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.229791] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.229802] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.238196] ata1.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max UDMA/133
[    2.238201] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.246199] ata1.00: configured for UDMA/133
[    2.246382] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68J 01.0 PQ: 0 ANSI: 5
[    2.246494] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.246497] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.246509] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.246584] sd 0:0:0:0: [sda] Write Protect is off
[    2.246586] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.246623] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.249795] scsi 2:0:0:0: CD-ROM            ASUS     DRW-24B5ST       1.00 PQ: 0 ANSI: 5
[    2.253414] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.253416] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.253478] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.253514] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.256899] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24B3ST       1.00 PQ: 0 ANSI: 5
[    2.260287] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.260346] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    2.260399] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    2.276845]  sda: sda1 sda2 sda3
[    2.277096] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.278145] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    2.278147] Write protecting the kernel read-only data: 12288k
[    2.279692] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    2.280999] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    2.290665] systemd-udevd[135]: starting version 204
[    2.309218] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[    2.310013] scsi4 : usb-storage 2-1.3:1.0
[    2.310085] usbcore: registered new interface driver usb-storage
[    2.311172] [drm] Initialized drm 1.1.0 20060810
[    2.334930] [drm] Memory usable by graphics device = 2048M
[    2.335014] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
[    2.377748] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    2.377758] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.377758] [drm] Driver supports precise vblank timestamp query.
[    2.377806] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.395305] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.395307] [drm] This can cause pipe underruns and display issues.
[    2.395308] [drm] Please upgrade your BIOS to fix this.
[    2.424388] fbcon: inteldrmfb (fb0) is primary device
[    2.521825] Switched to clocksource tsc
[    2.608046] Console: switching to colour frame buffer device 160x64
[    2.610430] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.610431] i915 0000:00:02.0: registered panic notifier
[    2.610464] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.714991] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    3.138356] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.310097] scsi 4:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[    3.310250] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.311761] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.478800] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    3.717559] random: nonblocking pool is initialized
[    3.801372] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   16.151436] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.208571] systemd-udevd[378]: starting version 204
[   16.376904] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.388480] lp: driver loaded but no devices found
[   16.396910] ppdev: user-space parallel port driver
[   16.399332] parport_pc 00:07: reported by Plug and Play ACPI
[   16.399383] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.406258] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   16.414960] media: module verification failed: signature and/or  required key missing - tainting kernel
[   16.415168] media: Linux media interface: v0.10
[   16.416077] Linux video capture interface: v2.00
[   16.416081] WARNING: You are using an experimental version of the media stack.
[   16.416081] 	As the driver is backported to an older kernel, it doesn't offer
[   16.416081] 	enough quality for its usage in production.
[   16.416081] 	Use it with care.
[   16.416081] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.416081] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.416081] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.416081] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.417895] WARNING: You are using an experimental version of the media stack.
[   16.417895] 	As the driver is backported to an older kernel, it doesn't offer
[   16.417895] 	enough quality for its usage in production.
[   16.417895] 	Use it with care.
[   16.417895] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.417895] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.417895] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.417895] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.432604] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   16.432819] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 17, latency: 32, mmio: 0xfbdff000
[   16.432827] saa7133[0]: subsystem: 5ace:7290, board: Beholder BeholdTV T7 [card=194,autodetected]
[   16.432841] saa7133[0]: board init: gpio is 0
[   16.434413] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[   16.434420] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.434448] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.494782] lp0: using parport0 (interrupt-driven).
[   16.525045] device-mapper: multipath: version 1.6.0 loaded
[   16.545007] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   16.559602] SKU: Nid=0x1d sku_cfg=0x4005e601
[   16.559605] SKU: port_connectivity=0x1
[   16.559606] SKU: enable_pcbeep=0x0
[   16.559608] SKU: check_sum=0x00000005
[   16.559609] SKU: customization=0x000000e6
[   16.559610] SKU: external_amp=0x0
[   16.559611] SKU: platform_type=0x0
[   16.559612] SKU: swap=0x0
[   16.559613] SKU: override=0x1
[   16.559891] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   16.559894]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.559896]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.559897]    mono: mono_out=0x0
[   16.559897]    inputs:
[   16.559900]      Rear Mic=0x18
[   16.559901]      Front Mic=0x19
[   16.559903]      Line=0x1a
[   16.559904]      CD=0x1c
[   16.559906] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   16.559908] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   16.562559] saa7133[0]: i2c eeprom 00: ce 5a 90 72 54 20 00 00 00 00 00 00 00 00 00 01
[   16.562568] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562578] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562585] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562593] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562600] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562607] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562618] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562625] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562632] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562639] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562646] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562656] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562664] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562670] saa7133[0]: i2c eeprom e0: a7 1f 01 00 ff ff ff ff ff ff ff ff ff ff ff ff
[   16.562678] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[   16.574660] tuner 9-0061: Tuner -1 found with type(s) Radio TV.
[   16.580847] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.581895] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.581965] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.582028] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.582093] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.582151] xc5000: xc5000_attach(9-0061)
[   16.582153] xc5000 9-0061: creating new instance
[   16.582525] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   16.587213] xc5000: XREG_PRODUCT_ID 2000
[   16.587216] xc5000: Successfully identified at address 0x61
[   16.587218] xc5000: Firmware has not been loaded previously
[   16.587224] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.594561] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20
[   16.594565] xc5000: xc_set_signal_source(1) Source = CABLE
[   16.612213] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   16.612216] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   16.633675] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   16.658532] xc5000: xc_tune_channel(400000000)
[   16.658535] xc5000: xc_set_rf_frequency(400000000)
[   16.806506] xc5000: *** ADC envelope (0-1023) = 1540
[   16.814501] xc5000: *** Frequency error = 0 Hz
[   16.822498] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2814
[   16.838498] xc5000: *** HW: V0.0, FW: V 0.0.0
[   16.846491] xc5000: *** Horizontal sync frequency = 7378 Hz
[   16.854491] xc5000: *** Frame lines = 980
[   16.866484] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   16.874522] xc5000: *** Unweighted analog SNR = 58 dB
[   16.882496] xc5000: *** Total gain = 211.80 dB
[   16.882504] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.890492] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000
[   17.139314] xc5000: firmware read 16497 bytes.
[   17.139317] xc5000: waiting for firmware upload (dvb-fe-xc5000c-4.1.30.7.fw)...
[   17.139318] xc5000: firmware uploading...
[   17.139319] xc5000: xc5000_tuner_reset()
[   17.205582] init: failsafe main process (707) killed by TERM signal
[   17.581055] Bluetooth: Core ver 2.17
[   17.581073] NET: Registered protocol family 31
[   17.581075] Bluetooth: HCI device and connection manager initialized
[   17.581083] Bluetooth: HCI socket layer initialized
[   17.581085] Bluetooth: L2CAP socket layer initialized
[   17.581089] Bluetooth: SCO socket layer initialized
[   17.584291] Bluetooth: RFCOMM TTY layer initialized
[   17.584300] Bluetooth: RFCOMM socket layer initialized
[   17.584304] Bluetooth: RFCOMM ver 1.11
[   17.584614] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.584617] Bluetooth: BNEP filters: protocol multicast
[   17.584622] Bluetooth: BNEP socket layer initialized
[   18.067147] init: cups main process (777) killed by HUP signal
[   18.067156] init: cups main process ended, respawning
[   19.425946] xc5000: Firmware upload complete...
[   19.457934] xc5000: xc_initialize()
[   19.789844] xc5000: Firmware dvb-fe-xc5000c-4.1.30.7.fw loaded and running.
[   19.789850] xc5000: xc_set_signal_source(1) Source = CABLE
[   19.805865] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   19.805869] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   19.853828] xc5000: xc_tune_channel(400000000)
[   19.853832] xc5000: xc_set_rf_frequency(400000000)
[   20.141968] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
[   20.142520] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   20.314662] init: samba-ad-dc main process (816) terminated with status 1
[   20.581679] xc5000: *** ADC envelope (0-1023) = 472
[   20.589688] xc5000: *** Frequency error = 78 Hz
[   20.597659] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   20.613661] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   20.621658] xc5000: *** Horizontal sync frequency = 15855 Hz
[   20.629667] xc5000: *** Frame lines = 517
[   20.637663] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   20.645654] xc5000: *** Unweighted analog SNR = 0 dB
[   20.653651] xc5000: *** Total gain = 124.18 dB
[   20.661662] xc5000: *** PLL lock status = 0x0000
[   20.717656] Registered IR keymap rc-behold
[   20.717747] input: i2c IR (BeholdTV) as /devices/virtual/rc/rc0/input11
[   20.717798] rc0: i2c IR (BeholdTV) as /devices/virtual/rc/rc0
[   20.717800] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-9/9-002d/ir0 [saa7133[0]]
[   20.718059] xc5000: xc5000_sleep()
[   20.718110] saa7133[0]: registered device video0 [v4l2]
[   20.718139] saa7133[0]: registered device vbi0
[   20.718167] saa7133[0]: registered device radio0
[   20.719519] saa7134 ALSA driver for DMA sound loaded
[   20.719539] saa7133[0]/alsa: saa7133[0] at 0xfbdff000 irq 17 registered as card -2
[   20.721922] WARNING: You are using an experimental version of the media stack.
[   20.721922] 	As the driver is backported to an older kernel, it doesn't offer
[   20.721922] 	enough quality for its usage in production.
[   20.721922] 	Use it with care.
[   20.721922] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   20.721922] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   20.721922] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   20.721922] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   20.722345] dvb_init() allocating 1 frontend
[   20.723080] xc5000: xc5000_config_radio() frequency=1400000 (in units of khz)
[   20.723082] xc5000: xc5000_config_radio() radio input not configured
[   20.723114] xc5000: xc5000_sleep()
[   20.723399] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   20.725644] i2c i2c-9: Added multiplexed i2c bus 10
[   20.725649] si2168 9-0064: Silicon Labs Si2168 successfully attached
[   20.725662] xc5000: xc5000_attach(9-0061)
[   20.725664] xc5000 9-0061: attaching existing instance
[   20.729647] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   20.729656] xc5000: xc_set_signal_source(1) Source = CABLE
[   20.737638] xc5000: XREG_PRODUCT_ID 14b4
[   20.737642] xc5000: Successfully identified at address 0x61
[   20.737645] xc5000: Firmware has been loaded previously
[   20.737649] DVB: registering new adapter (saa7133[0])
[   20.737656] saa7134 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[   20.761629] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   20.761632] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   20.833651] si2168 9-0064: found a 'Silicon Labs Si2168-A30 build 2 id 0'
[   20.849645] xc5000: xc_tune_channel(400000000)
[   20.849650] xc5000: xc_set_rf_frequency(400000000)
[   20.857454] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-a30b2-01.fw'
[   21.597449] xc5000: *** ADC envelope (0-1023) = 508
[   21.613543] xc5000: *** Frequency error = 125 Hz
[   21.629451] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   21.661441] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   21.677442] xc5000: *** Horizontal sync frequency = 15710 Hz
[   21.693419] xc5000: *** Frame lines = 65535
[   21.709421] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   21.729420] xc5000: *** Unweighted analog SNR = 63 dB
[   21.745407] xc5000: *** Total gain = 124.18 dB
[   21.761438] xc5000: *** PLL lock status = 0x0001
[   21.801496] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   21.817487] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   21.817490] xc5000: xc_set_signal_source(1) Source = CABLE
[   21.849400] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   21.849404] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   21.945407] xc5000: xc_tune_channel(400000000)
[   21.945412] xc5000: xc_set_rf_frequency(400000000)
[   22.256522] vboxdrv: Found 4 processor cores.
[   22.256725] vboxdrv: fAsync=0 offMin=0x1ce offMax=0xa7a
[   22.256798] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   22.256800] vboxdrv: Successfully loaded version 4.3.26 (interface 0x001a000a).
[   22.466817] vboxpci: IOMMU not found (not registered)
[   22.689232] xc5000: *** ADC envelope (0-1023) = 384
[   22.705223] xc5000: *** Frequency error = 46 Hz
[   22.721229] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   22.753211] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   22.769219] xc5000: *** Horizontal sync frequency = 15679 Hz
[   22.785234] xc5000: *** Frame lines = 65535
[   22.801238] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   22.817216] xc5000: *** Unweighted analog SNR = 63 dB
[   22.841196] xc5000: *** Total gain = 124.18 dB
[   22.857192] xc5000: *** PLL lock status = 0x0000
[   22.868035] init: plymouth-upstart-bridge main process ended, respawning
[   22.874579] init: plymouth-upstart-bridge main process (1740) terminated with status 1
[   22.874596] init: plymouth-upstart-bridge main process ended, respawning
[   22.889296] xc5000: xc5000_sleep()
[   22.889312] xc5000: xc5000_sleep()
[   72.291210] si2168 9-0064: firmware download took 51448 ms
[   72.323167] si2168 9-0064: firmware version: 3.0.20
[   72.395140] xc5000: xc5000_sleep()
[   93.374874] xc5000: xc5000_init()
[   93.382871] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   93.494854] xc5000: *** ADC envelope (0-1023) = 308
[   93.502857] xc5000: *** Frequency error = 265 Hz
[   93.510849] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   93.526852] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   93.534858] xc5000: *** Horizontal sync frequency = 15778 Hz
[   93.542840] xc5000: *** Frame lines = 65535
[   93.550837] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   93.558839] xc5000: *** Unweighted analog SNR = 27 dB
[   93.566835] xc5000: *** Total gain = 124.18 dB
[   93.574831] xc5000: *** PLL lock status = 0x0001
[   93.582834] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   93.582838] xc5000: xc5000_set_digital_params() frequency=554000000 (Hz)
[   93.582840] xc5000: xc5000_set_digital_params() OFDM
[   93.582842] xc5000: xc5000_set_digital_params() frequency=554000000 (compensated to 551250000)
[   93.582843] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   93.598831] xc5000: xc_set_tv_standard(0x800b,0x00c0)
[   93.598834] xc5000: xc_set_tv_standard() Standard = DTV8
[   93.630826] xc5000: xc_set_IF_frequency(freq_khz = 5000) freq_code = 0x1400
[   93.646821] xc5000: xc5000_tune_digital() setting OUTPUT_AMP to 0x8a
[   93.662815] xc5000: xc_tune_channel(551250000)
[   93.662818] xc5000: xc_set_rf_frequency(551250000)
[   94.290744] xc5000: *** ADC envelope (0-1023) = 652
[   94.298709] xc5000: *** Frequency error = 0 Hz
[   94.306708] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[   94.322736] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   94.330707] xc5000: *** Horizontal sync frequency = 15610 Hz
[   94.338735] xc5000: *** Frame lines = 759
[   94.346700] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   94.354700] xc5000: *** Unweighted analog SNR = 63 dB
[   94.362727] xc5000: *** Total gain = 88.64 dB
[   94.370694] xc5000: *** PLL lock status = 0x0001
[   96.450341] xc5000 9-0061: Total Gain: -88dB (22692)
[   98.145950] xc5000 9-0061: Total Gain: -88dB (22692)
[  100.101536] xc5000 9-0061: Total Gain: -88dB (22692)
user@Andrey-Linux ~ $ 
