[    0.727438] ehci-pci: EHCI PCI platform driver
[    0.727511] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.727516] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.727527] ehci-pci 0000:00:1a.0: debug port 2
[    0.731414] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[    0.731425] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    0.742167] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.742198] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.742200] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.742201] usb usb1: Product: EHCI Host Controller
[    0.742202] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.742203] usb usb1: SerialNumber: 0000:00:1a.0
[    0.742275] hub 1-0:1.0: USB hub found
[    0.742280] hub 1-0:1.0: 2 ports detected
[    0.742402] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.742406] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.742416] ehci-pci 0000:00:1d.0: debug port 2
[    0.746303] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    0.746313] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    0.758182] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.758236] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758238] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758240] usb usb2: Product: EHCI Host Controller
[    0.758241] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.758242] usb usb2: SerialNumber: 0000:00:1d.0
[    0.758370] hub 2-0:1.0: USB hub found
[    0.758377] hub 2-0:1.0: 2 ports detected
[    0.758440] ehci-platform: EHCI generic platform driver
[    0.758445] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.758446] ohci-pci: OHCI PCI platform driver
[    0.758451] ohci-platform: OHCI generic platform driver
[    0.758455] uhci_hcd: USB Universal Host Controller Interface driver
[    0.758508] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758512] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.758652] xhci_hcd 0000:04:00.0: irq 40 for MSI/MSI-X
[    0.758718] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758719] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758720] usb usb3: Product: xHCI Host Controller
[    0.758722] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758723] usb usb3: SerialNumber: 0000:04:00.0
[    0.758896] hub 3-0:1.0: USB hub found
[    0.758906] hub 3-0:1.0: 2 ports detected
[    0.758956] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758959] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.758988] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.758990] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758991] usb usb4: Product: xHCI Host Controller
[    0.758992] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758993] usb usb4: SerialNumber: 0000:04:00.0
[    0.759135] hub 4-0:1.0: USB hub found
[    0.759146] hub 4-0:1.0: 2 ports detected
[    0.766301] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.766711] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.766716] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.766954] mousedev: PS/2 mouse device common for all mice
[    0.767322] rtc_cmos 00:03: RTC can wake from S4
[    0.767512] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.767539] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.767587] device-mapper: uevent: version 1.0.3
[    0.767650] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.767655] ledtrig-cpu: registered to indicate activity on CPUs
[    0.767726] TCP: cubic registered
[    0.767784] NET: Registered protocol family 10
[    0.767905] NET: Registered protocol family 17
[    0.767914] Key type dns_resolver registered
[    0.768202] Loading compiled-in X.509 certificates
[    0.768913] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    0.768924] registered taskstats version 1
[    0.770478] Key type trusted registered
[    0.771690] Key type encrypted registered
[    0.772877] AppArmor: AppArmor sha1 policy hashing enabled
[    0.772879] IMA: No TPM chip found, activating TPM-bypass!
[    0.773112] regulator-dummy: disabling
[    0.773177]   Magic number: 7:333:440
[    0.773196] clockevents broadcast: hash matches
[    0.773207] pci 0000:00:1c.1: hash matches
[    0.773269] rtc_cmos 00:03: setting system clock to 2015-07-02 17:25:54 UTC (1435857954)
[    0.773758] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.773759] EDD information not available.
[    0.773778] PM: Hibernation image not present or could not be loaded.
[    0.791720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.054148] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.186522] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.186527] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.186825] hub 1-1:1.0: USB hub found
[    1.186900] hub 1-1:1.0: 4 ports detected
[    1.202135] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.202238] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.210305] ata4.00: ATAPI: ASUS    DRW-24B3ST, 1.00, max UDMA/100
[    1.210367] ata3.00: ATAPI: ASUS    DRW-24B5ST, 1.00, max UDMA/100
[    1.226301] ata3.00: configured for UDMA/100
[    1.226350] ata4.00: configured for UDMA/100
[    1.298130] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.430481] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.430486] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.430774] hub 2-1:1.0: USB hub found
[    1.430849] hub 2-1:1.0: 6 ports detected
[    1.522017] tsc: Refined TSC clocksource calibration: 3092.973 MHz
[    1.702162] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.983227] usb 2-1.3: New USB device found, idVendor=048d, idProduct=1336
[    1.983232] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.983235] usb 2-1.3: Product: Mass Storage Device
[    1.983237] usb 2-1.3: Manufacturer: Generic   
[    1.983240] usb 2-1.3: SerialNumber: 00000000000006
[    2.073897] ata2.01: failed to resume link (SControl 0)
[    2.084643] ata2.00: SATA link down (SStatus 0 SControl 300)
[    2.084656] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.084672] ata1.01: failed to resume link (SControl 0)
[    2.237925] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.237936] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.246886] ata1.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max UDMA/133
[    2.246891] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.254877] ata1.00: configured for UDMA/133
[    2.255059] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68J 01.0 PQ: 0 ANSI: 5
[    2.255155] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.255159] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.255163] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.255232] sd 0:0:0:0: [sda] Write Protect is off
[    2.255235] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.255273] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.258522] scsi 2:0:0:0: CD-ROM            ASUS     DRW-24B5ST       1.00 PQ: 0 ANSI: 5
[    2.262146] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.262149] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.262220] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.262275] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.265820] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24B3ST       1.00 PQ: 0 ANSI: 5
[    2.269232] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.269394] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    2.269444] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    2.285985]  sda: sda1 sda2 sda3
[    2.286698] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.287774] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    2.287776] Write protecting the kernel read-only data: 12288k
[    2.289367] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    2.290674] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    2.299993] systemd-udevd[135]: starting version 204
[    2.313424] [drm] Initialized drm 1.1.0 20060810
[    2.322867] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[    2.326164] scsi4 : usb-storage 2-1.3:1.0
[    2.326234] usbcore: registered new interface driver usb-storage
[    2.336807] [drm] Memory usable by graphics device = 2048M
[    2.351117] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
[    2.377836] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    2.377845] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.377846] [drm] Driver supports precise vblank timestamp query.
[    2.377890] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.395773] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.395776] [drm] This can cause pipe underruns and display issues.
[    2.395777] [drm] Please upgrade your BIOS to fix this.
[    2.424357] fbcon: inteldrmfb (fb0) is primary device
[    2.521908] Switched to clocksource tsc
[    2.604213] Console: switching to colour frame buffer device 160x64
[    2.606596] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.606598] i915 0000:00:02.0: registered panic notifier
[    2.606629] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.726924] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    3.169677] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.326479] scsi 4:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[    3.326689] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.328084] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.491608] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    3.647948] random: nonblocking pool is initialized
[    3.813495] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   16.171228] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.217844] systemd-udevd[380]: starting version 204
[   16.323130] lp: driver loaded but no devices found
[   16.327298] ppdev: user-space parallel port driver
[   16.329713] parport_pc 00:07: reported by Plug and Play ACPI
[   16.329766] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.350322] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   16.355203] media: module verification failed: signature and/or  required key missing - tainting kernel
[   16.355422] media: Linux media interface: v0.10
[   16.356326] Linux video capture interface: v2.00
[   16.356330] WARNING: You are using an experimental version of the media stack.
[   16.356330] 	As the driver is backported to an older kernel, it doesn't offer
[   16.356330] 	enough quality for its usage in production.
[   16.356330] 	Use it with care.
[   16.356330] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.356330] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.356330] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.356330] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.357356] WARNING: You are using an experimental version of the media stack.
[   16.357356] 	As the driver is backported to an older kernel, it doesn't offer
[   16.357356] 	enough quality for its usage in production.
[   16.357356] 	Use it with care.
[   16.357356] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.357356] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.357356] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.357356] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.359086] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.364078] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[   16.364084] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.364109] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.374622] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   16.374856] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 17, latency: 32, mmio: 0xfbdff000
[   16.374865] saa7133[0]: subsystem: 5ace:7290, board: Beholder BeholdTV T7 [card=194,autodetected]
[   16.374880] saa7133[0]: board init: gpio is 0
[   16.427554] lp0: using parport0 (interrupt-driven).
[   16.466178] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   16.485135] SKU: Nid=0x1d sku_cfg=0x4005e601
[   16.485137] SKU: port_connectivity=0x1
[   16.485138] SKU: enable_pcbeep=0x0
[   16.485139] SKU: check_sum=0x00000005
[   16.485139] SKU: customization=0x000000e6
[   16.485140] SKU: external_amp=0x0
[   16.485141] SKU: platform_type=0x0
[   16.485142] SKU: swap=0x0
[   16.485142] SKU: override=0x1
[   16.485481] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   16.485484]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.485485]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.485486]    mono: mono_out=0x0
[   16.485487]    inputs:
[   16.485489]      Rear Mic=0x18
[   16.485490]      Front Mic=0x19
[   16.485492]      Line=0x1a
[   16.485493]      CD=0x1c
[   16.485495] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   16.485496] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   16.490831] device-mapper: multipath: version 1.6.0 loaded
[   16.502887] saa7133[0]: i2c eeprom 00: ce 5a 90 72 54 20 00 00 00 00 00 00 00 00 00 01
[   16.502896] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502903] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502913] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502920] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502926] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502933] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502940] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502947] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502957] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502963] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502970] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502977] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502984] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.502991] saa7133[0]: i2c eeprom e0: a7 1f 01 00 ff ff ff ff ff ff ff ff ff ff ff ff
[   16.503001] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[   16.508546] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.508617] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.508681] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.508735] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.508790] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.508843] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   16.510817] tuner 9-0061: Tuner -1 found with type(s) Radio TV.
[   16.512269] xc5000: xc5000_attach(9-0061)
[   16.512273] xc5000 9-0061: creating new instance
[   16.518763] xc5000: XREG_PRODUCT_ID 2000
[   16.518767] xc5000: Successfully identified at address 0x61
[   16.518769] xc5000: Firmware has not been loaded previously
[   16.518775] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.526808] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20
[   16.526811] xc5000: xc_set_signal_source(1) Source = CABLE
[   16.542684] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   16.542687] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   16.560825] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   16.590671] xc5000: xc_tune_channel(400000000)
[   16.590675] xc5000: xc_set_rf_frequency(400000000)
[   16.738651] xc5000: *** ADC envelope (0-1023) = 1540
[   16.746643] xc5000: *** Frequency error = 0 Hz
[   16.754640] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2814
[   16.770634] xc5000: *** HW: V0.0, FW: V 0.0.0
[   16.778629] xc5000: *** Horizontal sync frequency = 7332 Hz
[   16.786657] xc5000: *** Frame lines = 20436
[   16.794646] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   16.802657] xc5000: *** Unweighted analog SNR = 58 dB
[   16.810623] xc5000: *** Total gain = 211.80 dB
[   16.810628] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.818635] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000
[   17.015119] xc5000: firmware read 16497 bytes.
[   17.015122] xc5000: waiting for firmware upload (dvb-fe-xc5000c-4.1.30.7.fw)...
[   17.015123] xc5000: firmware uploading...
[   17.015124] xc5000: xc5000_tuner_reset()
[   17.198634] init: failsafe main process (707) killed by TERM signal
[   17.713685] Bluetooth: Core ver 2.17
[   17.713701] NET: Registered protocol family 31
[   17.713703] Bluetooth: HCI device and connection manager initialized
[   17.713710] Bluetooth: HCI socket layer initialized
[   17.713711] Bluetooth: L2CAP socket layer initialized
[   17.713714] Bluetooth: SCO socket layer initialized
[   17.717088] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.717091] Bluetooth: BNEP filters: protocol multicast
[   17.717098] Bluetooth: BNEP socket layer initialized
[   17.717812] Bluetooth: RFCOMM TTY layer initialized
[   17.717822] Bluetooth: RFCOMM socket layer initialized
[   17.717827] Bluetooth: RFCOMM ver 1.11
[   18.201785] init: cups main process (778) killed by HUP signal
[   18.201793] init: cups main process ended, respawning
[   19.306075] xc5000: Firmware upload complete...
[   19.338075] xc5000: xc_initialize()
[   19.670593] xc5000: Firmware dvb-fe-xc5000c-4.1.30.7.fw loaded and running.
[   19.670599] xc5000: xc_set_signal_source(1) Source = CABLE
[   19.689990] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   19.689994] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   19.737976] xc5000: xc_tune_channel(400000000)
[   19.737979] xc5000: xc_set_rf_frequency(400000000)
[   19.744512] init: samba-ad-dc main process (814) terminated with status 1
[   19.744711] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
[   19.745266] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   20.465830] xc5000: *** ADC envelope (0-1023) = 432
[   20.473838] xc5000: *** Frequency error = 109 Hz
[   20.481821] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   20.497833] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   20.505811] xc5000: *** Horizontal sync frequency = 15519 Hz
[   20.513814] xc5000: *** Frame lines = 65535
[   20.521813] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   20.529819] xc5000: *** Unweighted analog SNR = 0 dB
[   20.537813] xc5000: *** Total gain = 124.18 dB
[   20.545825] xc5000: *** PLL lock status = 0x0000
[   20.601792] Registered IR keymap rc-behold
[   20.601886] input: i2c IR (BeholdTV) as /devices/virtual/rc/rc0/input11
[   20.601978] rc0: i2c IR (BeholdTV) as /devices/virtual/rc/rc0
[   20.601981] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-9/9-002d/ir0 [saa7133[0]]
[   20.602245] xc5000: xc5000_sleep()
[   20.602293] saa7133[0]: registered device video0 [v4l2]
[   20.602345] saa7133[0]: registered device vbi0
[   20.602416] saa7133[0]: registered device radio0
[   20.604218] saa7134 ALSA driver for DMA sound loaded
[   20.604244] saa7133[0]/alsa: saa7133[0] at 0xfbdff000 irq 17 registered as card -2
[   20.605378] WARNING: You are using an experimental version of the media stack.
[   20.605378] 	As the driver is backported to an older kernel, it doesn't offer
[   20.605378] 	enough quality for its usage in production.
[   20.605378] 	Use it with care.
[   20.605378] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   20.605378] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   20.605378] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   20.605378] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   20.605745] dvb_init() allocating 1 frontend
[   20.607760] xc5000: xc5000_config_radio() frequency=1400000 (in units of khz)
[   20.607763] xc5000: xc5000_config_radio() radio input not configured
[   20.607804] xc5000: xc5000_sleep()
[   20.608519] i2c i2c-9: Added multiplexed i2c bus 10
[   20.608523] si2168 9-0064: Silicon Labs Si2168 successfully attached
[   20.608536] xc5000: xc5000_attach(9-0061)
[   20.608538] xc5000 9-0061: attaching existing instance
[   20.609571] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   20.613797] xc5000: XREG_PRODUCT_ID 14b4
[   20.613801] xc5000: Successfully identified at address 0x61
[   20.613803] xc5000: Firmware has been loaded previously
[   20.613806] DVB: registering new adapter (saa7133[0])
[   20.613811] saa7134 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[   20.621841] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   20.621848] xc5000: xc_set_signal_source(1) Source = CABLE
[   20.653811] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   20.653817] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   20.709794] si2168 9-0064: found a 'Silicon Labs Si2168-A30 build 2 id 0'
[   20.722130] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-a30b2-01.fw'
[   20.741757] xc5000: xc_tune_channel(400000000)
[   20.741761] xc5000: xc_set_rf_frequency(400000000)
[   21.493605] xc5000: *** ADC envelope (0-1023) = 360
[   21.509601] xc5000: *** Frequency error = 15 Hz
[   21.525586] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   21.561583] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   21.577583] xc5000: *** Horizontal sync frequency = 15740 Hz
[   21.597578] xc5000: *** Frame lines = 65535
[   21.613569] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   21.629558] xc5000: *** Unweighted analog SNR = 63 dB
[   21.645556] xc5000: *** Total gain = 124.18 dB
[   21.661556] xc5000: *** PLL lock status = 0x0000
[   21.693673] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   21.709547] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   21.709552] xc5000: xc_set_signal_source(1) Source = CABLE
[   21.741637] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   21.741643] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   21.800308] vboxdrv: Found 4 processor cores.
[   21.800472] vboxdrv: fAsync=0 offMin=0x1d2 offMax=0x11d2
[   21.800521] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   21.800522] vboxdrv: Successfully loaded version 4.3.26 (interface 0x001a000a).
[   21.837517] xc5000: xc_tune_channel(400000000)
[   21.837520] xc5000: xc_set_rf_frequency(400000000)
[   22.009503] vboxpci: IOMMU not found (not registered)
[   22.569417] xc5000: *** ADC envelope (0-1023) = 596
[   22.585396] xc5000: *** Frequency error = 78 Hz
[   22.601371] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   22.604820] init: plymouth-upstart-bridge main process ended, respawning
[   22.610999] init: plymouth-upstart-bridge main process (1739) terminated with status 1
[   22.611015] init: plymouth-upstart-bridge main process ended, respawning
[   22.633347] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   22.649354] xc5000: *** Horizontal sync frequency = 15534 Hz
[   22.665346] xc5000: *** Frame lines = 65535
[   22.681358] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   22.697362] xc5000: *** Unweighted analog SNR = 63 dB
[   22.713372] xc5000: *** Total gain = 124.18 dB
[   22.729384] xc5000: *** PLL lock status = 0x0001
[   22.761504] xc5000: xc5000_sleep()
[   22.761519] xc5000: xc5000_sleep()
[   68.141874] si2168 9-0064: wait 59 
[   69.146167] si2168 9-0064: wait 58 
[   70.150466] si2168 9-0064: wait 57 
[   71.154791] si2168 9-0064: wait 56 
[   72.159068] si2168 9-0064: wait 55 
[   72.203121] si2168 9-0064: firmware download took 51472 ms
[   72.235130] si2168 9-0064: firmware version: 3.0.20
[   72.307150] xc5000: xc5000_sleep()
[   73.163395] si2168 9-0064: wait 54 
[   73.211396] xc5000: xc5000_init()
[   73.219398] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   73.331442] xc5000: *** ADC envelope (0-1023) = 460
[   73.339433] xc5000: *** Frequency error = 0 Hz
[   73.347427] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   73.363465] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   73.371436] xc5000: *** Horizontal sync frequency = 15557 Hz
[   73.379424] xc5000: *** Frame lines = 65535
[   73.387470] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   73.395442] xc5000: *** Unweighted analog SNR = 18 dB
[   73.403458] xc5000: *** Total gain = 124.18 dB
[   73.411443] xc5000: *** PLL lock status = 0x0000
[   73.419450] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   73.419455] xc5000: xc5000_set_digital_params() frequency=554000000 (Hz)
[   73.419457] xc5000: xc5000_set_digital_params() OFDM
[   73.419459] xc5000: xc5000_set_digital_params() frequency=554000000 (compensated to 551250000)
[   73.419461] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   73.435473] xc5000: xc_set_tv_standard(0x800b,0x00c0)
[   73.435477] xc5000: xc_set_tv_standard() Standard = DTV8
[   73.467494] xc5000: xc_set_IF_frequency(freq_khz = 5000) freq_code = 0x1400
[   73.483461] xc5000: xc5000_tune_digital() setting OUTPUT_AMP to 0x8a
[   73.499504] xc5000: xc_tune_channel(551250000)
[   73.499508] xc5000: xc_set_rf_frequency(551250000)
[   74.147697] xc5000: *** ADC envelope (0-1023) = 660
[   74.155675] xc5000: *** Frequency error = 0 Hz
[   74.163670] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[   74.179706] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   74.187678] xc5000: *** Horizontal sync frequency = 15824 Hz
[   74.195682] xc5000: *** Frame lines = 1987
[   74.203712] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   74.211709] xc5000: *** Unweighted analog SNR = 63 dB
[   74.219664] xc5000: *** Total gain = 88.17 dB
[   74.227669] xc5000: *** PLL lock status = 0x0001
[   76.256353] xc5000 9-0061: Total Gain: -88dB (22574)
[   77.944789] xc5000 9-0061: Total Gain: -88dB (22574)
[   79.781341] xc5000 9-0061: Total Gain: -88dB (22574)
user@Andrey-Linux ~ $ 
