[    0.727760] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.727766] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.727777] ehci-pci 0000:00:1a.0: debug port 2
[    0.731687] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[    0.731698] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    0.742091] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.742148] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.742150] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.742151] usb usb1: Product: EHCI Host Controller
[    0.742152] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.742153] usb usb1: SerialNumber: 0000:00:1a.0
[    0.742234] hub 1-0:1.0: USB hub found
[    0.742239] hub 1-0:1.0: 2 ports detected
[    0.742369] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.742372] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.742383] ehci-pci 0000:00:1d.0: debug port 2
[    0.746270] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    0.746281] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    0.758085] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.758143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758146] usb usb2: Product: EHCI Host Controller
[    0.758147] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.758148] usb usb2: SerialNumber: 0000:00:1d.0
[    0.758223] hub 2-0:1.0: USB hub found
[    0.758228] hub 2-0:1.0: 2 ports detected
[    0.758286] ehci-platform: EHCI generic platform driver
[    0.758291] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.758292] ohci-pci: OHCI PCI platform driver
[    0.758298] ohci-platform: OHCI generic platform driver
[    0.758301] uhci_hcd: USB Universal Host Controller Interface driver
[    0.758356] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758360] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.758498] xhci_hcd 0000:04:00.0: irq 40 for MSI/MSI-X
[    0.758563] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758564] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758565] usb usb3: Product: xHCI Host Controller
[    0.758566] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758568] usb usb3: SerialNumber: 0000:04:00.0
[    0.758631] hub 3-0:1.0: USB hub found
[    0.758639] hub 3-0:1.0: 2 ports detected
[    0.758687] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758689] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.758717] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.758718] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758720] usb usb4: Product: xHCI Host Controller
[    0.758721] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758722] usb usb4: SerialNumber: 0000:04:00.0
[    0.758781] hub 4-0:1.0: USB hub found
[    0.758788] hub 4-0:1.0: 2 ports detected
[    0.766190] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.766598] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.766604] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.766863] mousedev: PS/2 mouse device common for all mice
[    0.767255] rtc_cmos 00:03: RTC can wake from S4
[    0.767420] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.767447] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.767493] device-mapper: uevent: version 1.0.3
[    0.767551] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.767556] ledtrig-cpu: registered to indicate activity on CPUs
[    0.767626] TCP: cubic registered
[    0.767684] NET: Registered protocol family 10
[    0.767804] NET: Registered protocol family 17
[    0.767811] Key type dns_resolver registered
[    0.768043] Loading compiled-in X.509 certificates
[    0.768748] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    0.768757] registered taskstats version 1
[    0.770339] Key type trusted registered
[    0.771593] Key type encrypted registered
[    0.772796] AppArmor: AppArmor sha1 policy hashing enabled
[    0.772798] IMA: No TPM chip found, activating TPM-bypass!
[    0.773031] regulator-dummy: disabling
[    0.773097]   Magic number: 7:780:389
[    0.773186] rtc_cmos 00:03: setting system clock to 2015-07-02 17:22:16 UTC (1435857736)
[    0.773643] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.773644] EDD information not available.
[    0.773662] PM: Hibernation image not present or could not be loaded.
[    0.791663] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.054050] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.186420] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.186425] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.186714] hub 1-1:1.0: USB hub found
[    1.186793] hub 1-1:1.0: 4 ports detected
[    1.202037] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.202140] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.210207] ata4.00: ATAPI: ASUS    DRW-24B3ST, 1.00, max UDMA/100
[    1.210269] ata3.00: ATAPI: ASUS    DRW-24B5ST, 1.00, max UDMA/100
[    1.226204] ata3.00: configured for UDMA/100
[    1.226253] ata4.00: configured for UDMA/100
[    1.298033] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.430364] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.430369] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.430659] hub 2-1:1.0: USB hub found
[    1.430739] hub 2-1:1.0: 6 ports detected
[    1.521919] tsc: Refined TSC clocksource calibration: 3092.975 MHz
[    1.702060] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.983126] usb 2-1.3: New USB device found, idVendor=048d, idProduct=1336
[    1.983131] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.983134] usb 2-1.3: Product: Mass Storage Device
[    1.983137] usb 2-1.3: Manufacturer: Generic   
[    1.983139] usb 2-1.3: SerialNumber: 00000000000006
[    2.073800] ata2.01: failed to resume link (SControl 0)
[    2.084545] ata2.00: SATA link down (SStatus 0 SControl 300)
[    2.084557] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.084574] ata1.01: failed to resume link (SControl 0)
[    2.237827] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.237838] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.246770] ata1.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max UDMA/133
[    2.246775] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.254766] ata1.00: configured for UDMA/133
[    2.254947] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68J 01.0 PQ: 0 ANSI: 5
[    2.255045] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.255048] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.255068] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.255111] sd 0:0:0:0: [sda] Write Protect is off
[    2.255113] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.255143] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.258424] scsi 2:0:0:0: CD-ROM            ASUS     DRW-24B5ST       1.00 PQ: 0 ANSI: 5
[    2.262077] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.262081] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.262167] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.262257] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.265652] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24B3ST       1.00 PQ: 0 ANSI: 5
[    2.269009] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.269063] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    2.269103] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    2.281986]  sda: sda1 sda2 sda3
[    2.282213] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.283288] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    2.283289] Write protecting the kernel read-only data: 12288k
[    2.284901] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    2.286215] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    2.295681] systemd-udevd[135]: starting version 204
[    2.309121] [drm] Initialized drm 1.1.0 20060810
[    2.318709] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[    2.318838] scsi4 : usb-storage 2-1.3:1.0
[    2.318905] usbcore: registered new interface driver usb-storage
[    2.325656] [drm] Memory usable by graphics device = 2048M
[    2.347043] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
[    2.365781] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    2.365794] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.365795] [drm] Driver supports precise vblank timestamp query.
[    2.365843] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.383305] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.383308] [drm] This can cause pipe underruns and display issues.
[    2.383308] [drm] Please upgrade your BIOS to fix this.
[    2.412344] fbcon: inteldrmfb (fb0) is primary device
[    2.521813] Switched to clocksource tsc
[    2.596090] Console: switching to colour frame buffer device 160x64
[    2.598475] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.598476] i915 0000:00:02.0: registered panic notifier
[    2.598507] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.725681] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    3.032382] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.318379] scsi 4:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[    3.318587] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.319909] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.491125] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    3.708843] random: init urandom read with 126 bits of entropy available
[    3.755763] random: nonblocking pool is initialized
[    3.801434] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   16.001780] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.069381] systemd-udevd[378]: starting version 204
[   16.169223] lp: driver loaded but no devices found
[   16.173130] ppdev: user-space parallel port driver
[   16.175133] parport_pc 00:07: reported by Plug and Play ACPI
[   16.175181] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.212018] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   16.213790] media: module verification failed: signature and/or  required key missing - tainting kernel
[   16.213979] media: Linux media interface: v0.10
[   16.214871] Linux video capture interface: v2.00
[   16.214874] WARNING: You are using an experimental version of the media stack.
[   16.214874] 	As the driver is backported to an older kernel, it doesn't offer
[   16.214874] 	enough quality for its usage in production.
[   16.214874] 	Use it with care.
[   16.214874] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.214874] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.214874] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.214874] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.217250] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[   16.217258] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.217346] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.217553] WARNING: You are using an experimental version of the media stack.
[   16.217553] 	As the driver is backported to an older kernel, it doesn't offer
[   16.217553] 	enough quality for its usage in production.
[   16.217553] 	Use it with care.
[   16.217553] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.217553] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.217553] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.217553] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.228839] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   16.229409] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 17, latency: 32, mmio: 0xfbdff000
[   16.229419] saa7133[0]: subsystem: 5ace:7290, board: Beholder BeholdTV T7 [card=194,autodetected]
[   16.229434] saa7133[0]: board init: gpio is 0
[   16.270775] lp0: using parport0 (interrupt-driven).
[   16.296812] device-mapper: multipath: version 1.6.0 loaded
[   16.311075] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   16.322098] SKU: Nid=0x1d sku_cfg=0x4005e601
[   16.322101] SKU: port_connectivity=0x1
[   16.322102] SKU: enable_pcbeep=0x0
[   16.322102] SKU: check_sum=0x00000005
[   16.322103] SKU: customization=0x000000e6
[   16.322104] SKU: external_amp=0x0
[   16.322105] SKU: platform_type=0x0
[   16.322105] SKU: swap=0x0
[   16.322106] SKU: override=0x1
[   16.322389] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   16.322390]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.322391]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.322391]    mono: mono_out=0x0
[   16.322392]    inputs:
[   16.322393]      Rear Mic=0x18
[   16.322394]      Front Mic=0x19
[   16.322395]      Line=0x1a
[   16.322396]      CD=0x1c
[   16.322397] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   16.322398] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   16.337405] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.337479] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.337539] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.337596] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.337651] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.337707] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   16.347616] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.358643] saa7133[0]: i2c eeprom 00: ce 5a 90 72 54 20 00 00 00 00 00 00 00 00 00 01
[   16.358653] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358661] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358668] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358675] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358683] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358690] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358698] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358705] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358713] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358720] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358728] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358735] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358743] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358750] saa7133[0]: i2c eeprom e0: a7 1f 01 00 ff ff ff ff ff ff ff ff ff ff ff ff
[   16.358757] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[   16.368233] tuner 9-0061: Tuner -1 found with type(s) Radio TV.
[   16.371334] xc5000: xc5000_attach(9-0061)
[   16.371337] xc5000 9-0061: creating new instance
[   16.378748] xc5000: XREG_PRODUCT_ID 2000
[   16.378751] xc5000: Successfully identified at address 0x61
[   16.378753] xc5000: Firmware has not been loaded previously
[   16.378759] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.386786] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20
[   16.386791] xc5000: xc_set_signal_source(1) Source = CABLE
[   16.402670] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   16.402674] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   16.405106] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   16.450616] xc5000: xc_tune_channel(400000000)
[   16.450619] xc5000: xc_set_rf_frequency(400000000)
[   16.598580] xc5000: *** ADC envelope (0-1023) = 1540
[   16.606582] xc5000: *** Frequency error = 0 Hz
[   16.614578] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2814
[   16.630575] xc5000: *** HW: V0.0, FW: V 0.0.0
[   16.638578] xc5000: *** Horizontal sync frequency = 7355 Hz
[   16.646579] xc5000: *** Frame lines = 980
[   16.654569] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   16.662575] xc5000: *** Unweighted analog SNR = 58 dB
[   16.670570] xc5000: *** Total gain = 211.80 dB
[   16.670578] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.678573] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000
[   16.933408] xc5000: firmware read 16497 bytes.
[   16.933411] xc5000: waiting for firmware upload (dvb-fe-xc5000c-4.1.30.7.fw)...
[   16.933412] xc5000: firmware uploading...
[   16.933413] xc5000: xc5000_tuner_reset()
[   17.178524] init: failsafe main process (706) killed by TERM signal
[   17.608452] Bluetooth: Core ver 2.17
[   17.608470] NET: Registered protocol family 31
[   17.608471] Bluetooth: HCI device and connection manager initialized
[   17.608480] Bluetooth: HCI socket layer initialized
[   17.608481] Bluetooth: L2CAP socket layer initialized
[   17.608485] Bluetooth: SCO socket layer initialized
[   17.611062] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.611066] Bluetooth: BNEP filters: protocol multicast
[   17.611074] Bluetooth: BNEP socket layer initialized
[   17.612180] Bluetooth: RFCOMM TTY layer initialized
[   17.612187] Bluetooth: RFCOMM socket layer initialized
[   17.612192] Bluetooth: RFCOMM ver 1.11
[   18.127412] init: cups main process (788) killed by HUP signal
[   18.127420] init: cups main process ended, respawning
[   19.226032] xc5000: Firmware upload complete...
[   19.258018] xc5000: xc_initialize()
[   19.589938] xc5000: Firmware dvb-fe-xc5000c-4.1.30.7.fw loaded and running.
[   19.589945] xc5000: xc_set_signal_source(1) Source = CABLE
[   19.605920] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   19.605923] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   19.653925] xc5000: xc_tune_channel(400000000)
[   19.653930] xc5000: xc_set_rf_frequency(400000000)
[   19.672141] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
[   19.672691] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   19.884656] init: samba-ad-dc main process (813) terminated with status 1
[   20.373780] xc5000: *** ADC envelope (0-1023) = 376
[   20.381748] xc5000: *** Frequency error = 15 Hz
[   20.389756] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   20.405771] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   20.413741] xc5000: *** Horizontal sync frequency = 15633 Hz
[   20.421740] xc5000: *** Frame lines = 534
[   20.429738] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   20.437737] xc5000: *** Unweighted analog SNR = 9 dB
[   20.445742] xc5000: *** Total gain = 124.18 dB
[   20.453739] xc5000: *** PLL lock status = 0x0000
[   20.509725] Registered IR keymap rc-behold
[   20.509805] input: i2c IR (BeholdTV) as /devices/virtual/rc/rc0/input11
[   20.509856] rc0: i2c IR (BeholdTV) as /devices/virtual/rc/rc0
[   20.509858] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-9/9-002d/ir0 [saa7133[0]]
[   20.510052] xc5000: xc5000_sleep()
[   20.510148] saa7133[0]: registered device video0 [v4l2]
[   20.510262] saa7133[0]: registered device vbi0
[   20.510301] saa7133[0]: registered device radio0
[   20.512164] saa7134 ALSA driver for DMA sound loaded
[   20.512190] saa7133[0]/alsa: saa7133[0] at 0xfbdff000 irq 17 registered as card -2
[   20.513693] WARNING: You are using an experimental version of the media stack.
[   20.513693] 	As the driver is backported to an older kernel, it doesn't offer
[   20.513693] 	enough quality for its usage in production.
[   20.513693] 	Use it with care.
[   20.513693] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   20.513693] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   20.513693] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   20.513693] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   20.514258] dvb_init() allocating 1 frontend
[   20.516109] xc5000: xc5000_config_radio() frequency=1400000 (in units of khz)
[   20.516112] xc5000: xc5000_config_radio() radio input not configured
[   20.516116] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   20.519974] i2c i2c-9: Added multiplexed i2c bus 10
[   20.519978] si2168 9-0064: Silicon Labs Si2168 successfully attached
[   20.519990] xc5000: xc5000_attach(9-0061)
[   20.519992] xc5000 9-0061: attaching existing instance
[   20.521724] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   20.521729] xc5000: xc_set_signal_source(1) Source = CABLE
[   20.529715] xc5000: XREG_PRODUCT_ID 14b4
[   20.529718] xc5000: Successfully identified at address 0x61
[   20.529721] xc5000: Firmware has been loaded previously
[   20.529727] DVB: registering new adapter (saa7133[0])
[   20.529731] saa7134 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[   20.553732] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   20.553737] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   20.629704] si2168 9-0064: found a 'Silicon Labs Si2168-A30 build 2 id 0'
[   20.645722] xc5000: xc_tune_channel(400000000)
[   20.645726] xc5000: xc_set_rf_frequency(400000000)
[   20.684854] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-a30b2-01.fw'
[   21.381562] xc5000: *** ADC envelope (0-1023) = 480
[   21.397538] xc5000: *** Frequency error = 15 Hz
[   21.413548] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   21.445522] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   21.461517] xc5000: *** Horizontal sync frequency = 15694 Hz
[   21.477534] xc5000: *** Frame lines = 65535
[   21.493592] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   21.509508] xc5000: *** Unweighted analog SNR = 63 dB
[   21.525530] xc5000: *** Total gain = 124.18 dB
[   21.541501] xc5000: *** PLL lock status = 0x0001
[   21.573606] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   21.589490] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   21.589495] xc5000: xc_set_signal_source(1) Source = CABLE
[   21.621485] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   21.621493] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   21.717472] xc5000: xc_tune_channel(400000000)
[   21.717476] xc5000: xc_set_rf_frequency(400000000)
[   22.283703] vboxdrv: Found 4 processor cores.
[   22.284276] vboxdrv: fAsync=0 offMin=0x32a offMax=0x453e
[   22.284536] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   22.284538] vboxdrv: Successfully loaded version 4.3.26 (interface 0x001a000a).
[   22.453308] xc5000: *** ADC envelope (0-1023) = 360
[   22.469294] xc5000: *** Frequency error = 93 Hz
[   22.485312] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   22.494603] vboxpci: IOMMU not found (not registered)
[   22.517313] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   22.533303] xc5000: *** Horizontal sync frequency = 15633 Hz
[   22.549297] xc5000: *** Frame lines = 65535
[   22.565303] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   22.576916] init: plymouth-upstart-bridge main process ended, respawning
[   22.581293] xc5000: *** Unweighted analog SNR = 0 dB
[   22.582943] init: plymouth-upstart-bridge main process (1608) terminated with status 1
[   22.582952] init: plymouth-upstart-bridge main process ended, respawning
[   22.597264] xc5000: *** Total gain = 124.18 dB
[   22.613270] xc5000: *** PLL lock status = 0x0001
[   22.645363] xc5000: xc5000_sleep()
[   22.645388] xc5000: xc5000_sleep()
[   22.645414] xc5000: xc5000_sleep()
[   22.859536] init: plymouth-stop pre-start process (1675) terminated with status 1
[   72.119058] si2168 9-0064: firmware download took 51428 ms
[   72.151067] si2168 9-0064: firmware version: 3.0.20
[   72.223063] xc5000: xc5000_sleep()
[  115.063847] xc5000: xc5000_init()
[  115.071850] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[  115.183822] xc5000: *** ADC envelope (0-1023) = 928
[  115.191820] xc5000: *** Frequency error = 1023656 Hz
[  115.199819] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[  115.215816] xc5000: *** HW: V6.0, FW: V 4.1.57374
[  115.223817] xc5000: *** Horizontal sync frequency = 15794 Hz
[  115.231809] xc5000: *** Frame lines = 65535
[  115.239810] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[  115.247809] xc5000: *** Unweighted analog SNR = 40 dB
[  115.255807] xc5000: *** Total gain = 124.18 dB
[  115.263803] xc5000: *** PLL lock status = 0x0001
[  115.271807] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[  115.271811] xc5000: xc5000_set_digital_params() frequency=554000000 (Hz)
[  115.271812] xc5000: xc5000_set_digital_params() OFDM
[  115.271814] xc5000: xc5000_set_digital_params() frequency=554000000 (compensated to 551250000)
[  115.271816] xc5000: xc_set_signal_source(0) Source = ANTENNA
[  115.287804] xc5000: xc_set_tv_standard(0x800b,0x00c0)
[  115.287807] xc5000: xc_set_tv_standard() Standard = DTV8
[  115.319799] xc5000: xc_set_IF_frequency(freq_khz = 5000) freq_code = 0x1400
[  115.335795] xc5000: xc5000_tune_digital() setting OUTPUT_AMP to 0x8a
[  115.351789] xc5000: xc_tune_channel(551250000)
[  115.351791] xc5000: xc_set_rf_frequency(551250000)
[  115.979717] xc5000: *** ADC envelope (0-1023) = 708
[  115.987686] xc5000: *** Frequency error = 0 Hz
[  115.995670] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[  116.011709] xc5000: *** HW: V6.0, FW: V 4.1.57374
[  116.019662] xc5000: *** Horizontal sync frequency = 16023 Hz
[  116.027705] xc5000: *** Frame lines = 371
[  116.035672] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[  116.043670] xc5000: *** Unweighted analog SNR = 58 dB
[  116.051699] xc5000: *** Total gain = 88.78 dB
[  116.059667] xc5000: *** PLL lock status = 0x0001
[  118.303203] xc5000 9-0061: Total Gain: -88dB (22730)
[  120.006889] xc5000 9-0061: Total Gain: -88dB (22730)
[  121.934503] xc5000 9-0061: Total Gain: -88dB (22730)
[  123.866081] xc5000 9-0061: Total Gain: -88dB (22730)
[  125.765734] xc5000 9-0061: Total Gain: -88dB (22730)
[  127.709301] xc5000 9-0061: Total Gain: -88dB (22730)
[  129.632945] xc5000 9-0061: Total Gain: -88dB (22730)
[  131.556550] xc5000 9-0061: Total Gain: -88dB (22730)
[  133.352171] xc5000 9-0061: Total Gain: -88dB (22730)
user@Andrey-Linux ~ $ 
