[    0.742240] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.742241] usb usb1: SerialNumber: 0000:00:1a.0
[    0.742329] hub 1-0:1.0: USB hub found
[    0.742334] hub 1-0:1.0: 2 ports detected
[    0.742463] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.742466] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.742477] ehci-pci 0000:00:1d.0: debug port 2
[    0.746367] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    0.746381] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    0.758171] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.758231] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758233] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758234] usb usb2: Product: EHCI Host Controller
[    0.758235] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.758236] usb usb2: SerialNumber: 0000:00:1d.0
[    0.758315] hub 2-0:1.0: USB hub found
[    0.758319] hub 2-0:1.0: 2 ports detected
[    0.758379] ehci-platform: EHCI generic platform driver
[    0.758384] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.758385] ohci-pci: OHCI PCI platform driver
[    0.758391] ohci-platform: OHCI generic platform driver
[    0.758395] uhci_hcd: USB Universal Host Controller Interface driver
[    0.758449] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758452] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.758590] xhci_hcd 0000:04:00.0: irq 40 for MSI/MSI-X
[    0.758657] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758659] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758660] usb usb3: Product: xHCI Host Controller
[    0.758661] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758663] usb usb3: SerialNumber: 0000:04:00.0
[    0.758728] hub 3-0:1.0: USB hub found
[    0.758736] hub 3-0:1.0: 2 ports detected
[    0.758786] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758788] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.758817] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.758818] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758819] usb usb4: Product: xHCI Host Controller
[    0.758820] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758822] usb usb4: SerialNumber: 0000:04:00.0
[    0.758880] hub 4-0:1.0: USB hub found
[    0.758888] hub 4-0:1.0: 2 ports detected
[    0.766287] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.766700] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.766705] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.766792] mousedev: PS/2 mouse device common for all mice
[    0.766893] rtc_cmos 00:03: RTC can wake from S4
[    0.767003] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.767028] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.767072] device-mapper: uevent: version 1.0.3
[    0.767119] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.767125] ledtrig-cpu: registered to indicate activity on CPUs
[    0.767195] TCP: cubic registered
[    0.767255] NET: Registered protocol family 10
[    0.767376] NET: Registered protocol family 17
[    0.767383] Key type dns_resolver registered
[    0.767540] Loading compiled-in X.509 certificates
[    0.768247] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    0.768256] registered taskstats version 1
[    0.769855] Key type trusted registered
[    0.771070] Key type encrypted registered
[    0.772280] AppArmor: AppArmor sha1 policy hashing enabled
[    0.772283] IMA: No TPM chip found, activating TPM-bypass!
[    0.772514] regulator-dummy: disabling
[    0.772579]   Magic number: 7:230:339
[    0.772677] rtc_cmos 00:03: setting system clock to 2015-07-02 17:20:04 UTC (1435857604)
[    0.773156] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.773157] EDD information not available.
[    0.773176] PM: Hibernation image not present or could not be loaded.
[    0.791119] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.054131] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.186503] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.186508] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.186789] hub 1-1:1.0: USB hub found
[    1.186865] hub 1-1:1.0: 4 ports detected
[    1.202125] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.202229] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.210303] ata4.00: ATAPI: ASUS    DRW-24B3ST, 1.00, max UDMA/100
[    1.210364] ata3.00: ATAPI: ASUS    DRW-24B5ST, 1.00, max UDMA/100
[    1.226292] ata3.00: configured for UDMA/100
[    1.226341] ata4.00: configured for UDMA/100
[    1.298117] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.430446] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.430451] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.430733] hub 2-1:1.0: USB hub found
[    1.430812] hub 2-1:1.0: 6 ports detected
[    1.522007] tsc: Refined TSC clocksource calibration: 3092.974 MHz
[    1.702129] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.983181] usb 2-1.3: New USB device found, idVendor=048d, idProduct=1336
[    1.983186] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.983189] usb 2-1.3: Product: Mass Storage Device
[    1.983191] usb 2-1.3: Manufacturer: Generic   
[    1.983194] usb 2-1.3: SerialNumber: 00000000000006
[    2.073886] ata1.01: failed to resume link (SControl 0)
[    2.073958] ata2.01: failed to resume link (SControl 0)
[    2.084693] ata2.00: SATA link down (SStatus 0 SControl 300)
[    2.084705] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.229918] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.229929] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.238263] ata1.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max UDMA/133
[    2.238268] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.246234] ata1.00: configured for UDMA/133
[    2.246415] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68J 01.0 PQ: 0 ANSI: 5
[    2.246512] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.246515] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.246535] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.246576] sd 0:0:0:0: [sda] Write Protect is off
[    2.246579] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.246609] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.249854] scsi 2:0:0:0: CD-ROM            ASUS     DRW-24B5ST       1.00 PQ: 0 ANSI: 5
[    2.253765] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.253769] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.253905] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.253950] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.257400] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24B3ST       1.00 PQ: 0 ANSI: 5
[    2.260806] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.260967] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    2.261018] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    2.269789]  sda: sda1 sda2 sda3
[    2.270305] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.271348] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    2.271350] Write protecting the kernel read-only data: 12288k
[    2.272899] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    2.274204] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    2.283744] systemd-udevd[134]: starting version 204
[    2.300494] [drm] Initialized drm 1.1.0 20060810
[    2.302770] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[    2.303120] scsi4 : usb-storage 2-1.3:1.0
[    2.303186] usbcore: registered new interface driver usb-storage
[    2.321137] [drm] Memory usable by graphics device = 2048M
[    2.331117] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
[    2.361833] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    2.361842] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.361843] [drm] Driver supports precise vblank timestamp query.
[    2.361890] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.379282] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.379284] [drm] This can cause pipe underruns and display issues.
[    2.379285] [drm] Please upgrade your BIOS to fix this.
[    2.408378] fbcon: inteldrmfb (fb0) is primary device
[    2.521920] Switched to clocksource tsc
[    2.592204] Console: switching to colour frame buffer device 160x64
[    2.594602] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.594604] i915 0000:00:02.0: registered panic notifier
[    2.594636] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.711452] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    3.142344] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.302451] scsi 4:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[    3.302659] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.304010] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.477669] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    3.653057] random: nonblocking pool is initialized
[    3.789505] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   16.144218] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.212732] systemd-udevd[378]: starting version 204
[   16.303192] lp: driver loaded but no devices found
[   16.315503] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   16.316919] ppdev: user-space parallel port driver
[   16.320293] parport_pc 00:07: reported by Plug and Play ACPI
[   16.320345] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.327536] media: module verification failed: signature and/or  required key missing - tainting kernel
[   16.327755] media: Linux media interface: v0.10
[   16.328624] Linux video capture interface: v2.00
[   16.328627] WARNING: You are using an experimental version of the media stack.
[   16.328627] 	As the driver is backported to an older kernel, it doesn't offer
[   16.328627] 	enough quality for its usage in production.
[   16.328627] 	Use it with care.
[   16.328627] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.328627] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.328627] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.328627] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.329708] WARNING: You are using an experimental version of the media stack.
[   16.329708] 	As the driver is backported to an older kernel, it doesn't offer
[   16.329708] 	enough quality for its usage in production.
[   16.329708] 	Use it with care.
[   16.329708] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.329708] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.329708] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.329708] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.336383] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   16.336626] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 17, latency: 32, mmio: 0xfbdff000
[   16.336635] saa7133[0]: subsystem: 5ace:7290, board: Beholder BeholdTV T7 [card=194,autodetected]
[   16.336650] saa7133[0]: board init: gpio is 0
[   16.405505] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[   16.405512] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.405556] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.405714] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   16.418848] lp0: using parport0 (interrupt-driven).
[   16.432731] SKU: Nid=0x1d sku_cfg=0x4005e601
[   16.432735] SKU: port_connectivity=0x1
[   16.432736] SKU: enable_pcbeep=0x0
[   16.432738] SKU: check_sum=0x00000005
[   16.432739] SKU: customization=0x000000e6
[   16.432740] SKU: external_amp=0x0
[   16.432741] SKU: platform_type=0x0
[   16.432742] SKU: swap=0x0
[   16.432743] SKU: override=0x1
[   16.433014] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   16.433017]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.433019]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.433020]    mono: mono_out=0x0
[   16.433021]    inputs:
[   16.433023]      Rear Mic=0x18
[   16.433024]      Front Mic=0x19
[   16.433026]      Line=0x1a
[   16.433027]      CD=0x1c
[   16.433029] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   16.433031] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   16.445327] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.463611] device-mapper: multipath: version 1.6.0 loaded
[   16.466664] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.466706] saa7133[0]: i2c eeprom 00: ce 5a 90 72 54 20 00 00 00 00 00 00 00 00 00 01
[   16.466715] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466723] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466730] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466738] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466745] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466753] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466761] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466769] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466776] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466790] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.466784] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466794] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466802] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466810] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466817] saa7133[0]: i2c eeprom e0: a7 1f 01 00 ff ff ff ff ff ff ff ff ff ff ff ff
[   16.466825] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[   16.466976] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.467045] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.467105] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.467159] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   16.478751] tuner 9-0061: Tuner -1 found with type(s) Radio TV.
[   16.480210] xc5000: xc5000_attach(9-0061)
[   16.480213] xc5000 9-0061: creating new instance
[   16.487030] xc5000: XREG_PRODUCT_ID 2000
[   16.487034] xc5000: Successfully identified at address 0x61
[   16.487036] xc5000: Firmware has not been loaded previously
[   16.487042] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.494726] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20
[   16.494731] xc5000: xc_set_signal_source(1) Source = CABLE
[   16.510688] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   16.510691] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   16.549054] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   16.558678] xc5000: xc_tune_channel(400000000)
[   16.558682] xc5000: xc_set_rf_frequency(400000000)
[   16.706646] xc5000: *** ADC envelope (0-1023) = 1540
[   16.714637] xc5000: *** Frequency error = 0 Hz
[   16.726636] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2814
[   16.742632] xc5000: *** HW: V0.0, FW: V 0.0.0
[   16.750628] xc5000: *** Horizontal sync frequency = 7385 Hz
[   16.758626] xc5000: *** Frame lines = 20436
[   16.770625] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   16.778640] xc5000: *** Unweighted analog SNR = 58 dB
[   16.786621] xc5000: *** Total gain = 211.80 dB
[   16.786627] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.794627] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000
[   16.987780] xc5000: firmware read 16497 bytes.
[   16.987783] xc5000: waiting for firmware upload (dvb-fe-xc5000c-4.1.30.7.fw)...
[   16.987785] xc5000: firmware uploading...
[   16.987786] xc5000: xc5000_tuner_reset()
[   17.387653] init: failsafe main process (707) killed by TERM signal
[   17.818469] Bluetooth: Core ver 2.17
[   17.818484] NET: Registered protocol family 31
[   17.818485] Bluetooth: HCI device and connection manager initialized
[   17.818492] Bluetooth: HCI socket layer initialized
[   17.818493] Bluetooth: L2CAP socket layer initialized
[   17.818496] Bluetooth: SCO socket layer initialized
[   17.822026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.822029] Bluetooth: BNEP filters: protocol multicast
[   17.822037] Bluetooth: BNEP socket layer initialized
[   17.823241] Bluetooth: RFCOMM TTY layer initialized
[   17.823250] Bluetooth: RFCOMM socket layer initialized
[   17.823255] Bluetooth: RFCOMM ver 1.11
[   18.188101] init: cups main process (782) killed by HUP signal
[   18.188110] init: cups main process ended, respawning
[   19.266100] xc5000: Firmware upload complete...
[   19.298079] xc5000: xc_initialize()
[   19.630013] xc5000: Firmware dvb-fe-xc5000c-4.1.30.7.fw loaded and running.
[   19.630020] xc5000: xc_set_signal_source(1) Source = CABLE
[   19.645994] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   19.645998] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   19.694012] xc5000: xc_tune_channel(400000000)
[   19.694018] xc5000: xc_set_rf_frequency(400000000)
[   20.064711] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
[   20.065263] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   20.228036] init: samba-ad-dc main process (813) terminated with status 1
[   20.429825] xc5000: *** ADC envelope (0-1023) = 468
[   20.437817] xc5000: *** Frequency error = 31 Hz
[   20.445813] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   20.461813] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   20.469809] xc5000: *** Horizontal sync frequency = 15778 Hz
[   20.477817] xc5000: *** Frame lines = 65535
[   20.485816] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   20.493814] xc5000: *** Unweighted analog SNR = 0 dB
[   20.501802] xc5000: *** Total gain = 124.18 dB
[   20.509800] xc5000: *** PLL lock status = 0x0001
[   20.565789] Registered IR keymap rc-behold
[   20.565862] input: i2c IR (BeholdTV) as /devices/virtual/rc/rc0/input11
[   20.565905] rc0: i2c IR (BeholdTV) as /devices/virtual/rc/rc0
[   20.565908] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-9/9-002d/ir0 [saa7133[0]]
[   20.566149] xc5000: xc5000_sleep()
[   20.566269] saa7133[0]: registered device video0 [v4l2]
[   20.566304] saa7133[0]: registered device vbi0
[   20.566337] saa7133[0]: registered device radio0
[   20.567751] saa7134 ALSA driver for DMA sound loaded
[   20.567779] saa7133[0]/alsa: saa7133[0] at 0xfbdff000 irq 17 registered as card -2
[   20.568556] WARNING: You are using an experimental version of the media stack.
[   20.568556] 	As the driver is backported to an older kernel, it doesn't offer
[   20.568556] 	enough quality for its usage in production.
[   20.568556] 	Use it with care.
[   20.568556] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   20.568556] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   20.568556] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   20.568556] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   20.569107] dvb_init() allocating 1 frontend
[   20.570490] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   20.575255] i2c i2c-9: Added multiplexed i2c bus 10
[   20.575261] si2168 9-0064: Silicon Labs Si2168 successfully attached
[   20.575276] xc5000: xc5000_attach(9-0061)
[   20.575278] xc5000 9-0061: attaching existing instance
[   20.577793] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   20.577797] xc5000: xc_set_signal_source(1) Source = CABLE
[   20.585791] xc5000: XREG_PRODUCT_ID 14b4
[   20.585798] xc5000: Successfully identified at address 0x61
[   20.585799] xc5000: Firmware has been loaded previously
[   20.585804] DVB: registering new adapter (saa7133[0])
[   20.585811] saa7134 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[   20.609792] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   20.609800] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   20.681794] si2168 9-0064: found a 'Silicon Labs Si2168-A30 build 2 id 0'
[   20.697791] xc5000: xc_tune_channel(400000000)
[   20.697796] xc5000: xc_set_rf_frequency(400000000)
[   20.717020] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-a30b2-01.fw'
[   21.437610] xc5000: *** ADC envelope (0-1023) = 592
[   21.453610] xc5000: *** Frequency error = 234 Hz
[   21.469609] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   21.501610] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   21.517606] xc5000: *** Horizontal sync frequency = 15435 Hz
[   21.533608] xc5000: *** Frame lines = 65535
[   21.549597] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   21.565571] xc5000: *** Unweighted analog SNR = 63 dB
[   21.581580] xc5000: *** Total gain = 124.18 dB
[   21.597595] xc5000: *** PLL lock status = 0x0001
[   21.629698] xc5000: xc5000_config_radio() frequency=1400000 (in units of khz)
[   21.645569] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   21.645573] xc5000: xc_set_tv_standard(0x9002,0x0208)
[   21.645575] xc5000: xc_set_tv_standard() Standard = FM Radio-INPUT1
[   21.713550] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   21.777639] xc5000: xc_tune_channel(87500000)
[   21.777645] xc5000: xc_set_rf_frequency(87500000)
[   22.093576] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   22.109534] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   22.109537] xc5000: xc_set_signal_source(1) Source = CABLE
[   22.141457] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   22.141463] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   22.237442] xc5000: xc_tune_channel(400000000)
[   22.237447] xc5000: xc_set_rf_frequency(400000000)
[   22.491840] vboxdrv: Found 4 processor cores.
[   22.492375] vboxdrv: fAsync=0 offMin=0x1ea offMax=0x37e2
[   22.492852] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   22.492855] vboxdrv: Successfully loaded version 4.3.26 (interface 0x001a000a).
[   22.701159] vboxpci: IOMMU not found (not registered)
[   22.977298] xc5000: *** ADC envelope (0-1023) = 468
[   22.993289] xc5000: *** Frequency error = 421 Hz
[   23.009336] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   23.041258] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   23.057258] xc5000: *** Horizontal sync frequency = 15694 Hz
[   23.073303] xc5000: *** Frame lines = 65535
[   23.089328] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   23.105259] xc5000: *** Unweighted analog SNR = 63 dB
[   23.121285] xc5000: *** Total gain = 124.18 dB
[   23.137233] xc5000: *** PLL lock status = 0x0001
[   23.169302] xc5000: xc5000_sleep()
[   23.169330] xc5000: xc5000_sleep()
[   23.169346] xc5000: xc5000_sleep()
[   23.205689] init: plymouth-upstart-bridge main process ended, respawning
[   23.209979] init: plymouth-upstart-bridge main process (1715) terminated with status 1
[   23.209991] init: plymouth-upstart-bridge main process ended, respawning
[   59.817797] si2168 9-0064: wait 59 
[   60.821631] si2168 9-0064: wait 58 
[   61.825413] si2168 9-0064: wait 57 
[   62.829198] si2168 9-0064: wait 56 
[   63.833000] si2168 9-0064: wait 55 
[   64.836819] si2168 9-0064: wait 54 
[   65.840585] si2168 9-0064: wait 53 
[   66.844436] si2168 9-0064: wait 52 
[   67.848206] si2168 9-0064: wait 51 
[   68.852000] si2168 9-0064: wait 50 
[   69.855780] si2168 9-0064: wait 49 
[   70.859557] si2168 9-0064: wait 48 
[   71.863365] si2168 9-0064: wait 47 
[   72.367274] si2168 9-0064: firmware download took 51664 ms
[   72.399282] si2168 9-0064: firmware version: 3.0.20
[   72.471266] xc5000: xc5000_sleep()
[   72.867187] si2168 9-0064: wait 46 
[   72.915176] xc5000: xc5000_init()
[   72.923137] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   73.035151] xc5000: *** ADC envelope (0-1023) = 328
[   73.043117] xc5000: *** Frequency error = 1023984 Hz
[   73.051109] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   73.067145] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   73.075098] xc5000: *** Horizontal sync frequency = 15939 Hz
[   73.083096] xc5000: *** Frame lines = 65535
[   73.091125] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   73.099093] xc5000: *** Unweighted analog SNR = 27 dB
[   73.107099] xc5000: *** Total gain = 124.18 dB
[   73.115139] xc5000: *** PLL lock status = 0x0001
[   73.123088] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   73.123093] xc5000: xc5000_set_digital_params() frequency=554000000 (Hz)
[   73.123095] xc5000: xc5000_set_digital_params() OFDM
[   73.123097] xc5000: xc5000_set_digital_params() frequency=554000000 (compensated to 551250000)
[   73.123099] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   73.139130] xc5000: xc_set_tv_standard(0x800b,0x00c0)
[   73.139135] xc5000: xc_set_tv_standard() Standard = DTV8
[   73.171125] xc5000: xc_set_IF_frequency(freq_khz = 5000) freq_code = 0x1400
[   73.187121] xc5000: xc5000_tune_digital() setting OUTPUT_AMP to 0x8a
[   73.203118] xc5000: xc_tune_channel(551250000)
[   73.203122] xc5000: xc_set_rf_frequency(551250000)
[   73.850985] xc5000: *** ADC envelope (0-1023) = 672
[   73.858946] xc5000: *** Frequency error = 0 Hz
[   73.866937] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[   73.882979] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   73.890933] xc5000: *** Horizontal sync frequency = 15443 Hz
[   73.898931] xc5000: *** Frame lines = 1139
[   73.906960] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   73.914927] xc5000: *** Unweighted analog SNR = 63 dB
[   73.922926] xc5000: *** Total gain = 88.64 dB
[   73.930956] xc5000: *** PLL lock status = 0x0001
[   76.058503] xc5000 9-0061: Total Gain: -88dB (22692)
[   77.774149] xc5000 9-0061: Total Gain: -88dB (22692)
[   79.681771] xc5000 9-0061: Total Gain: -88dB (22692)
[   81.545387] xc5000 9-0061: Total Gain: -88dB (22692)
user@Andrey-Linux ~ $ 
