[    0.546840] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.546865] io scheduler noop registered
[    0.546866] io scheduler deadline registered (default)
[    0.546883] io scheduler cfq registered
[    0.546935] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.547172] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.547182] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.547209] intel_idle: MWAIT substates: 0x1120
[    0.547210] intel_idle: v0.4 model 0x2A
[    0.547211] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.547275] ipmi message handler version 39.2
[    0.547315] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.547318] ACPI: Power Button [PWRB]
[    0.547342] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.547344] ACPI: Power Button [PWRF]
[    0.547778] GHES: HEST is not enabled!
[    0.547841] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.568246] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.569251] Linux agpgart interface v0.103
[    0.570172] brd: module loaded
[    0.570641] loop: module loaded
[    0.570712] ata_piix 0000:00:1f.2: version 2.13
[    0.570773] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.726400] scsi0 : ata_piix
[    0.726465] scsi1 : ata_piix
[    0.726494] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
[    0.726498] ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
[    0.726581] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.726908] scsi2 : ata_piix
[    0.726957] scsi3 : ata_piix
[    0.726982] ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    0.726985] ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[    0.727165] libphy: Fixed MDIO Bus: probed
[    0.727217] tun: Universal TUN/TAP device driver, 1.6
[    0.727218] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.727254] PPP generic driver version 2.4.2
[    0.727288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.727297] ehci-pci: EHCI PCI platform driver
[    0.727370] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.727375] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.727386] ehci-pci 0000:00:1a.0: debug port 2
[    0.731296] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[    0.731307] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    0.742015] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.742047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.742049] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.742050] usb usb1: Product: EHCI Host Controller
[    0.742051] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.742052] usb usb1: SerialNumber: 0000:00:1a.0
[    0.742125] hub 1-0:1.0: USB hub found
[    0.742130] hub 1-0:1.0: 2 ports detected
[    0.742252] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.742256] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.742266] ehci-pci 0000:00:1d.0: debug port 2
[    0.746156] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    0.746168] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    0.758030] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.758084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758087] usb usb2: Product: EHCI Host Controller
[    0.758088] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.758089] usb usb2: SerialNumber: 0000:00:1d.0
[    0.758242] hub 2-0:1.0: USB hub found
[    0.758249] hub 2-0:1.0: 2 ports detected
[    0.758311] ehci-platform: EHCI generic platform driver
[    0.758316] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.758317] ohci-pci: OHCI PCI platform driver
[    0.758322] ohci-platform: OHCI generic platform driver
[    0.758325] uhci_hcd: USB Universal Host Controller Interface driver
[    0.758380] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758383] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.758521] xhci_hcd 0000:04:00.0: irq 40 for MSI/MSI-X
[    0.758587] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758590] usb usb3: Product: xHCI Host Controller
[    0.758591] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758592] usb usb3: SerialNumber: 0000:04:00.0
[    0.758740] hub 3-0:1.0: USB hub found
[    0.758751] hub 3-0:1.0: 2 ports detected
[    0.758802] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758805] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.758834] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.758835] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758837] usb usb4: Product: xHCI Host Controller
[    0.758838] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758839] usb usb4: SerialNumber: 0000:04:00.0
[    0.758982] hub 4-0:1.0: USB hub found
[    0.758991] hub 4-0:1.0: 2 ports detected
[    0.766151] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.766560] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.766565] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.766828] mousedev: PS/2 mouse device common for all mice
[    0.767221] rtc_cmos 00:03: RTC can wake from S4
[    0.767414] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.767440] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.767488] device-mapper: uevent: version 1.0.3
[    0.767551] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.767557] ledtrig-cpu: registered to indicate activity on CPUs
[    0.767627] TCP: cubic registered
[    0.767685] NET: Registered protocol family 10
[    0.767806] NET: Registered protocol family 17
[    0.767812] Key type dns_resolver registered
[    0.768146] Loading compiled-in X.509 certificates
[    0.768857] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    0.768867] registered taskstats version 1
[    0.770435] Key type trusted registered
[    0.771668] Key type encrypted registered
[    0.772861] AppArmor: AppArmor sha1 policy hashing enabled
[    0.772863] IMA: No TPM chip found, activating TPM-bypass!
[    0.773096] regulator-dummy: disabling
[    0.773159]   Magic number: 7:471:86
[    0.773249] rtc_cmos 00:03: setting system clock to 2015-07-02 17:05:57 UTC (1435856757)
[    0.773689] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.773691] EDD information not available.
[    0.773710] PM: Hibernation image not present or could not be loaded.
[    0.789038] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.053993] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.186280] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.186285] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.186574] hub 1-1:1.0: USB hub found
[    1.186653] hub 1-1:1.0: 4 ports detected
[    1.201981] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.202084] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.210153] ata4.00: ATAPI: ASUS    DRW-24B3ST, 1.00, max UDMA/100
[    1.210214] ata3.00: ATAPI: ASUS    DRW-24B5ST, 1.00, max UDMA/100
[    1.226149] ata4.00: configured for UDMA/100
[    1.226199] ata3.00: configured for UDMA/100
[    1.297974] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.430231] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.430236] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.430526] hub 2-1:1.0: USB hub found
[    1.430602] hub 2-1:1.0: 6 ports detected
[    1.521862] tsc: Refined TSC clocksource calibration: 3092.974 MHz
[    1.701911] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.982978] usb 2-1.3: New USB device found, idVendor=048d, idProduct=1336
[    1.982983] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.982986] usb 2-1.3: Product: Mass Storage Device
[    1.982988] usb 2-1.3: Manufacturer: Generic   
[    1.982990] usb 2-1.3: SerialNumber: 00000000000006
[    2.073744] ata2.01: failed to resume link (SControl 0)
[    2.084492] ata2.00: SATA link down (SStatus 0 SControl 300)
[    2.084505] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.084521] ata1.01: failed to resume link (SControl 0)
[    2.237770] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.237781] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.246278] ata1.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max UDMA/133
[    2.246283] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.254273] ata1.00: configured for UDMA/133
[    2.254455] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68J 01.0 PQ: 0 ANSI: 5
[    2.254552] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.254555] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.254557] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.254664] sd 0:0:0:0: [sda] Write Protect is off
[    2.254668] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.254694] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.257864] scsi 2:0:0:0: CD-ROM            ASUS     DRW-24B5ST       1.00 PQ: 0 ANSI: 5
[    2.261529] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.261531] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.261599] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.261649] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.265073] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24B3ST       1.00 PQ: 0 ANSI: 5
[    2.268476] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.268637] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    2.268687] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    2.279635]  sda: sda1 sda2 sda3
[    2.280191] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.281233] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    2.281235] Write protecting the kernel read-only data: 12288k
[    2.282789] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    2.284101] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    2.293542] systemd-udevd[135]: starting version 204
[    2.307245] [drm] Initialized drm 1.1.0 20060810
[    2.313277] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[    2.313685] scsi4 : usb-storage 2-1.3:1.0
[    2.313738] usbcore: registered new interface driver usb-storage
[    2.328258] [drm] Memory usable by graphics device = 2048M
[    2.342982] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
[    2.369720] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    2.369729] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.369730] [drm] Driver supports precise vblank timestamp query.
[    2.369775] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.387284] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.387286] [drm] This can cause pipe underruns and display issues.
[    2.387287] [drm] Please upgrade your BIOS to fix this.
[    2.416162] fbcon: inteldrmfb (fb0) is primary device
[    2.521780] Switched to clocksource tsc
[    2.600059] Console: switching to colour frame buffer device 160x64
[    2.602443] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.602444] i915 0000:00:02.0: registered panic notifier
[    2.602475] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.718524] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    3.152194] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.314076] scsi 4:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[    3.314265] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.315642] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.483363] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    3.785373] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    3.785830] random: nonblocking pool is initialized
[   16.212288] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.256238] systemd-udevd[379]: starting version 204
[   16.431752] lp: driver loaded but no devices found
[   16.440318] ppdev: user-space parallel port driver
[   16.443390] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   16.446647] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.447863] parport_pc 00:07: reported by Plug and Play ACPI
[   16.447914] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.465540] media: module verification failed: signature and/or  required key missing - tainting kernel
[   16.465767] media: Linux media interface: v0.10
[   16.466747] Linux video capture interface: v2.00
[   16.466750] WARNING: You are using an experimental version of the media stack.
[   16.466750] 	As the driver is backported to an older kernel, it doesn't offer
[   16.466750] 	enough quality for its usage in production.
[   16.466750] 	Use it with care.
[   16.466750] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.466750] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.466750] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.466750] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.471030] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[   16.471038] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.471062] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.474302] WARNING: You are using an experimental version of the media stack.
[   16.474302] 	As the driver is backported to an older kernel, it doesn't offer
[   16.474302] 	enough quality for its usage in production.
[   16.474302] 	Use it with care.
[   16.474302] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.474302] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.474302] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.474302] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.481526] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   16.481745] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 17, latency: 32, mmio: 0xfbdff000
[   16.481754] saa7133[0]: subsystem: 5ace:7290, board: Beholder BeholdTV T7 [card=194,autodetected]
[   16.481769] saa7133[0]: board init: gpio is 0
[   16.526427] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   16.541587] lp0: using parport0 (interrupt-driven).
[   16.559131] SKU: Nid=0x1d sku_cfg=0x4005e601
[   16.559135] SKU: port_connectivity=0x1
[   16.559136] SKU: enable_pcbeep=0x0
[   16.559137] SKU: check_sum=0x00000005
[   16.559138] SKU: customization=0x000000e6
[   16.559140] SKU: external_amp=0x0
[   16.559141] SKU: platform_type=0x0
[   16.559142] SKU: swap=0x0
[   16.559143] SKU: override=0x1
[   16.559421] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   16.559423]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.559425]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.559426]    mono: mono_out=0x0
[   16.559427]    inputs:
[   16.559429]      Rear Mic=0x18
[   16.559431]      Front Mic=0x19
[   16.559432]      Line=0x1a
[   16.559433]      CD=0x1c
[   16.559435] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   16.559436] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   16.563782] device-mapper: multipath: version 1.6.0 loaded
[   16.576430] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.576504] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.576557] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.576608] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.576662] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.576717] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   16.606535] saa7133[0]: i2c eeprom 00: ce 5a 90 72 54 20 00 00 00 00 00 00 00 00 00 01
[   16.606545] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606552] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606558] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606565] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606572] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606579] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606586] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606593] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606600] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606606] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606613] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606619] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606626] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606633] saa7133[0]: i2c eeprom e0: a7 1f 01 00 ff ff ff ff ff ff ff ff ff ff ff ff
[   16.606640] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[   16.614624] tuner 9-0061: Tuner -1 found with type(s) Radio TV.
[   16.624001] xc5000: xc5000_attach(9-0061)
[   16.624004] xc5000 9-0061: creating new instance
[   16.631606] xc5000: XREG_PRODUCT_ID 2000
[   16.631610] xc5000: Successfully identified at address 0x61
[   16.631611] xc5000: Firmware has not been loaded previously
[   16.631617] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.638549] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20
[   16.638554] xc5000: xc_set_signal_source(1) Source = CABLE
[   16.654876] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   16.654880] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   16.663937] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   16.702495] xc5000: xc_tune_channel(400000000)
[   16.702498] xc5000: xc_set_rf_frequency(400000000)
[   16.850463] xc5000: *** ADC envelope (0-1023) = 1540
[   16.858467] xc5000: *** Frequency error = 0 Hz
[   16.866780] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2814
[   16.882457] xc5000: *** HW: V0.0, FW: V 0.0.0
[   16.890453] xc5000: *** Horizontal sync frequency = 7355 Hz
[   16.898456] xc5000: *** Frame lines = 980
[   16.906453] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   16.914452] xc5000: *** Unweighted analog SNR = 58 dB
[   16.922448] xc5000: *** Total gain = 211.80 dB
[   16.922455] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.930450] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000
[   17.130951] xc5000: firmware read 16497 bytes.
[   17.130954] xc5000: waiting for firmware upload (dvb-fe-xc5000c-4.1.30.7.fw)...
[   17.130955] xc5000: firmware uploading...
[   17.130956] xc5000: xc5000_tuner_reset()
[   17.201413] init: failsafe main process (707) killed by TERM signal
[   17.594547] Bluetooth: Core ver 2.17
[   17.594564] NET: Registered protocol family 31
[   17.594565] Bluetooth: HCI device and connection manager initialized
[   17.594573] Bluetooth: HCI socket layer initialized
[   17.594576] Bluetooth: L2CAP socket layer initialized
[   17.594580] Bluetooth: SCO socket layer initialized
[   17.597103] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.597107] Bluetooth: BNEP filters: protocol multicast
[   17.597116] Bluetooth: BNEP socket layer initialized
[   17.597808] Bluetooth: RFCOMM TTY layer initialized
[   17.597816] Bluetooth: RFCOMM socket layer initialized
[   17.597822] Bluetooth: RFCOMM ver 1.11
[   18.050913] init: cups main process (783) killed by HUP signal
[   18.050921] init: cups main process ended, respawning
[   19.417901] xc5000: Firmware upload complete...
[   19.449920] xc5000: xc_initialize()
[   19.614594] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
[   19.615144] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   19.693387] init: samba-ad-dc main process (814) terminated with status 1
[   19.781842] xc5000: Firmware dvb-fe-xc5000c-4.1.30.7.fw loaded and running.
[   19.781851] xc5000: xc_set_signal_source(1) Source = CABLE
[   19.797834] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   19.797838] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   19.845834] xc5000: xc_tune_channel(400000000)
[   19.845838] xc5000: xc_set_rf_frequency(400000000)
[   20.573661] xc5000: *** ADC envelope (0-1023) = 500
[   20.581656] xc5000: *** Frequency error = 421 Hz
[   20.589653] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   20.605651] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   20.613660] xc5000: *** Horizontal sync frequency = 15679 Hz
[   20.621645] xc5000: *** Frame lines = 65535
[   20.629656] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   20.637650] xc5000: *** Unweighted analog SNR = 0 dB
[   20.645650] xc5000: *** Total gain = 124.18 dB
[   20.653658] xc5000: *** PLL lock status = 0x0000
[   20.709629] Registered IR keymap rc-behold
[   20.709705] input: i2c IR (BeholdTV) as /devices/virtual/rc/rc0/input11
[   20.709814] rc0: i2c IR (BeholdTV) as /devices/virtual/rc/rc0
[   20.709818] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-9/9-002d/ir0 [saa7133[0]]
[   20.710091] xc5000: xc5000_sleep()
[   20.710138] saa7133[0]: registered device video0 [v4l2]
[   20.710196] saa7133[0]: registered device vbi0
[   20.710235] saa7133[0]: registered device radio0
[   20.712657] saa7134 ALSA driver for DMA sound loaded
[   20.712684] saa7133[0]/alsa: saa7133[0] at 0xfbdff000 irq 17 registered as card -2
[   20.713334] WARNING: You are using an experimental version of the media stack.
[   20.713334] 	As the driver is backported to an older kernel, it doesn't offer
[   20.713334] 	enough quality for its usage in production.
[   20.713334] 	Use it with care.
[   20.713334] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   20.713334] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   20.713334] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   20.713334] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   20.713708] dvb_init() allocating 1 frontend
[   20.715975] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   20.717919] i2c i2c-9: Added multiplexed i2c bus 10
[   20.717922] si2168 9-0064: Silicon Labs Si2168 successfully attached
[   20.717931] xc5000: xc5000_attach(9-0061)
[   20.717933] xc5000 9-0061: attaching existing instance
[   20.721724] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   20.721731] xc5000: xc_set_signal_source(1) Source = CABLE
[   20.729615] xc5000: XREG_PRODUCT_ID 14b4
[   20.729622] xc5000: Successfully identified at address 0x61
[   20.729625] xc5000: Firmware has been loaded previously
[   20.729628] DVB: registering new adapter (saa7133[0])
[   20.729632] saa7134 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[   20.753625] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   20.753631] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   20.825597] si2168 9-0064: found a 'Silicon Labs Si2168-A30 build 2 id 0'
[   20.841591] xc5000: xc_tune_channel(400000000)
[   20.841596] xc5000: xc_set_rf_frequency(400000000)
[   20.849091] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-a30b2-01.fw'
[   21.565441] xc5000: *** ADC envelope (0-1023) = 520
[   21.581463] xc5000: *** Frequency error = 171 Hz
[   21.597480] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   21.629456] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   21.645422] xc5000: *** Horizontal sync frequency = 15794 Hz
[   21.661449] xc5000: *** Frame lines = 65535
[   21.677423] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   21.693401] xc5000: *** Unweighted analog SNR = 0 dB
[   21.709411] xc5000: *** Total gain = 124.18 dB
[   21.725395] xc5000: *** PLL lock status = 0x0001
[   21.757524] xc5000: xc5000_config_radio() frequency=1400000 (in units of khz)
[   21.773422] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   21.773429] xc5000: xc_set_tv_standard(0x9002,0x0208)
[   21.773432] xc5000: xc_set_tv_standard() Standard = FM Radio-INPUT1
[   21.828778] vboxdrv: Found 4 processor cores.
[   21.829093] vboxdrv: fAsync=0 offMin=0x17e offMax=0xa46
[   21.829168] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   21.829170] vboxdrv: Successfully loaded version 4.3.26 (interface 0x001a000a).
[   21.837383] xc5000: xc_set_signal_source(0) Source = ANTENNA
[   21.901375] xc5000: xc_tune_channel(87500000)
[   21.901379] xc5000: xc_set_rf_frequency(87500000)
[   22.040616] vboxpci: IOMMU not found (not registered)
[   22.217308] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   22.233302] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   22.233309] xc5000: xc_set_signal_source(1) Source = CABLE
[   22.265287] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   22.265290] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   22.344614] init: plymouth-upstart-bridge main process ended, respawning
[   22.349855] init: plymouth-upstart-bridge main process (1659) terminated with status 1
[   22.349869] init: plymouth-upstart-bridge main process ended, respawning
[   22.361273] xc5000: xc_tune_channel(400000000)
[   22.361283] xc5000: xc_set_rf_frequency(400000000)
[   22.389149] init: plymouth-stop pre-start process (1679) terminated with status 1
[   23.105106] xc5000: *** ADC envelope (0-1023) = 536
[   23.121119] xc5000: *** Frequency error = 531 Hz
[   23.137105] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   23.169092] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   23.185095] xc5000: *** Horizontal sync frequency = 15664 Hz
[   23.201088] xc5000: *** Frame lines = 65535
[   23.217091] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   23.233084] xc5000: *** Unweighted analog SNR = 0 dB
[   23.249095] xc5000: *** Total gain = 124.18 dB
[   23.265099] xc5000: *** PLL lock status = 0x0001
[   23.297136] xc5000: xc5000_sleep()
[   23.297192] xc5000: xc5000_sleep()
[   23.297298] xc5000: xc5000_sleep()
user@Andrey-Linux ~ $ 
