[    0.144371] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.144373] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.144375] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.144379] pci 0000:00:1c.0:   bridge window [mem 0xdfa00000-0xdfbfffff]
[    0.144383] pci 0000:00:1c.0:   bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref]
[    0.144388] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.144396] pci 0000:02:00.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.144412] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.144416] pci 0000:00:1c.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.144423] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.144427] pci 0000:00:1c.2:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.144434] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.144437] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.144441] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.144448] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.144450] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.144451] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.144452] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.144454] pci_bus 0000:00: resource 8 [mem 0xdfa00000-0xfebfffff]
[    0.144455] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.144456] pci_bus 0000:01: resource 1 [mem 0xdfa00000-0xdfbfffff]
[    0.144458] pci_bus 0000:01: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref]
[    0.144459] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.144460] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.144462] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.144463] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.144464] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[    0.144465] pci_bus 0000:02: resource 8 [mem 0xdfa00000-0xfebfffff]
[    0.144467] pci_bus 0000:03: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.144468] pci_bus 0000:03: resource 5 [mem 0xfbd00000-0xfbdfffff]
[    0.144470] pci_bus 0000:03: resource 8 [io  0x0000-0x0cf7]
[    0.144471] pci_bus 0000:03: resource 9 [io  0x0d00-0xffff]
[    0.144472] pci_bus 0000:03: resource 10 [mem 0x000a0000-0x000bffff]
[    0.144473] pci_bus 0000:03: resource 11 [mem 0x000c0000-0x000dffff]
[    0.144475] pci_bus 0000:03: resource 12 [mem 0xdfa00000-0xfebfffff]
[    0.144476] pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    0.144477] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.144479] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.144499] NET: Registered protocol family 2
[    0.144647] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.144710] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.144769] TCP: Hash tables configured (established 32768 bind 32768)
[    0.144785] TCP: reno registered
[    0.144790] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.144804] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.144850] NET: Registered protocol family 1
[    0.145062] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.145073] pci 0000:00:02.0: Boot video device
[    0.174386] PCI: CLS 4 bytes, default 64
[    0.174432] Trying to unpack rootfs image as initramfs...
[    0.524929] Freeing initrd memory: 28300K (ffff88007e45c000 - ffff88007ffff000)
[    0.524934] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.524936] software IO TLB [mem 0xd6fa0000-0xdafa0000] (64MB) mapped at [ffff8800d6fa0000-ffff8800daf9ffff]
[    0.525152] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25
[    0.525156] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25
[    0.525160] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x25
[    0.525165] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25
[    0.525209] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.525210] Scanning for low memory corruption every 60 seconds
[    0.525396] Initialise system trusted keyring
[    0.525431] audit: initializing netlink socket (disabled)
[    0.525443] type=2000 audit(1435786565.524:1): initialized
[    0.545419] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.546152] zbud: loaded
[    0.546259] VFS: Disk quotas dquot_6.5.2
[    0.546289] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.546579] fuse init (API version 7.22)
[    0.546626] msgmni has been set to 7734
[    0.546663] Key type big_key registered
[    0.546945] Key type asymmetric registered
[    0.546947] Asymmetric key parser 'x509' registered
[    0.546968] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.546996] io scheduler noop registered
[    0.546998] io scheduler deadline registered (default)
[    0.547015] io scheduler cfq registered
[    0.547066] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.547304] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.547314] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.547342] intel_idle: MWAIT substates: 0x1120
[    0.547343] intel_idle: v0.4 model 0x2A
[    0.547344] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.547409] ipmi message handler version 39.2
[    0.547449] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.547453] ACPI: Power Button [PWRB]
[    0.547477] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.547478] ACPI: Power Button [PWRF]
[    0.547906] GHES: HEST is not enabled!
[    0.547974] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.568381] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.569444] Linux agpgart interface v0.103
[    0.570381] brd: module loaded
[    0.570859] loop: module loaded
[    0.570930] ata_piix 0000:00:1f.2: version 2.13
[    0.570992] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.726456] scsi0 : ata_piix
[    0.726520] scsi1 : ata_piix
[    0.726547] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
[    0.726551] ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
[    0.726636] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.726963] scsi2 : ata_piix
[    0.727011] scsi3 : ata_piix
[    0.727037] ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    0.727039] ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[    0.727222] libphy: Fixed MDIO Bus: probed
[    0.727274] tun: Universal TUN/TAP device driver, 1.6
[    0.727275] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.727312] PPP generic driver version 2.4.2
[    0.727347] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.727356] ehci-pci: EHCI PCI platform driver
[    0.727429] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.727434] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.727445] ehci-pci 0000:00:1a.0: debug port 2
[    0.731340] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[    0.731351] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    0.742067] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.742099] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.742100] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.742102] usb usb1: Product: EHCI Host Controller
[    0.742103] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.742104] usb usb1: SerialNumber: 0000:00:1a.0
[    0.742176] hub 1-0:1.0: USB hub found
[    0.742181] hub 1-0:1.0: 2 ports detected
[    0.742303] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.742307] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.742317] ehci-pci 0000:00:1d.0: debug port 2
[    0.746199] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    0.746210] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    0.758082] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.758136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758139] usb usb2: Product: EHCI Host Controller
[    0.758140] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.758142] usb usb2: SerialNumber: 0000:00:1d.0
[    0.758295] hub 2-0:1.0: USB hub found
[    0.758302] hub 2-0:1.0: 2 ports detected
[    0.758364] ehci-platform: EHCI generic platform driver
[    0.758370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.758371] ohci-pci: OHCI PCI platform driver
[    0.758376] ohci-platform: OHCI generic platform driver
[    0.758379] uhci_hcd: USB Universal Host Controller Interface driver
[    0.758433] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758436] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.758577] xhci_hcd 0000:04:00.0: irq 40 for MSI/MSI-X
[    0.758643] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758644] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758645] usb usb3: Product: xHCI Host Controller
[    0.758647] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758648] usb usb3: SerialNumber: 0000:04:00.0
[    0.758770] hub 3-0:1.0: USB hub found
[    0.758780] hub 3-0:1.0: 2 ports detected
[    0.758831] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758834] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.758863] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.758865] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758866] usb usb4: Product: xHCI Host Controller
[    0.758867] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758868] usb usb4: SerialNumber: 0000:04:00.0
[    0.758986] hub 4-0:1.0: USB hub found
[    0.758997] hub 4-0:1.0: 2 ports detected
[    0.766202] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.766588] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.766593] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.766831] mousedev: PS/2 mouse device common for all mice
[    0.767228] rtc_cmos 00:03: RTC can wake from S4
[    0.767444] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.767471] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.767519] device-mapper: uevent: version 1.0.3
[    0.767581] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.767587] ledtrig-cpu: registered to indicate activity on CPUs
[    0.767658] TCP: cubic registered
[    0.767716] NET: Registered protocol family 10
[    0.767837] NET: Registered protocol family 17
[    0.767843] Key type dns_resolver registered
[    0.768136] Loading compiled-in X.509 certificates
[    0.768848] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    0.768858] registered taskstats version 1
[    0.770412] Key type trusted registered
[    0.771633] Key type encrypted registered
[    0.772803] AppArmor: AppArmor sha1 policy hashing enabled
[    0.772806] IMA: No TPM chip found, activating TPM-bypass!
[    0.773052] regulator-dummy: disabling
[    0.773119]   Magic number: 7:888:650
[    0.773135] tty ttyprintk: hash matches
[    0.773159] acpi LNXCPU:03: hash matches
[    0.773211] rtc_cmos 00:03: setting system clock to 2015-07-01 21:36:06 UTC (1435786566)
[    0.773684] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.773685] EDD information not available.
[    0.773704] PM: Hibernation image not present or could not be loaded.
[    0.791100] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.054046] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.186323] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.186328] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.186626] hub 1-1:1.0: USB hub found
[    1.186701] hub 1-1:1.0: 4 ports detected
[    1.202034] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.202137] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.210206] ata4.00: ATAPI: ASUS    DRW-24B3ST, 1.00, max UDMA/100
[    1.210268] ata3.00: ATAPI: ASUS    DRW-24B5ST, 1.00, max UDMA/100
[    1.226202] ata4.00: configured for UDMA/100
[    1.226252] ata3.00: configured for UDMA/100
[    1.298030] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.430279] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.430284] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.430574] hub 2-1:1.0: USB hub found
[    1.430633] hub 2-1:1.0: 6 ports detected
[    1.521917] tsc: Refined TSC clocksource calibration: 3092.973 MHz
[    1.701955] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.983149] usb 2-1.3: New USB device found, idVendor=048d, idProduct=1336
[    1.983154] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.983157] usb 2-1.3: Product: Mass Storage Device
[    1.983159] usb 2-1.3: Manufacturer: Generic   
[    1.983161] usb 2-1.3: SerialNumber: 00000000000006
[    2.073801] ata1.01: failed to resume link (SControl 0)
[    2.073886] ata2.01: failed to resume link (SControl 0)
[    2.084619] ata2.00: SATA link down (SStatus 0 SControl 300)
[    2.084631] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.229827] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.229839] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.238419] ata1.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max UDMA/133
[    2.238424] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.246425] ata1.00: configured for UDMA/133
[    2.246608] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68J 01.0 PQ: 0 ANSI: 5
[    2.246705] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.246708] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.246712] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.246779] sd 0:0:0:0: [sda] Write Protect is off
[    2.246782] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.246817] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.250022] scsi 2:0:0:0: CD-ROM            ASUS     DRW-24B5ST       1.00 PQ: 0 ANSI: 5
[    2.253837] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.253839] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.253911] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.253967] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.257478] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24B3ST       1.00 PQ: 0 ANSI: 5
[    2.260883] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.261050] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    2.261103] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    2.264168]  sda: sda1 sda2 sda3
[    2.264752] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.265800] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    2.265802] Write protecting the kernel read-only data: 12288k
[    2.267345] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    2.268661] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    2.278196] systemd-udevd[135]: starting version 204
[    2.290770] [drm] Initialized drm 1.1.0 20060810
[    2.300655] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[    2.303819] scsi4 : usb-storage 2-1.3:1.0
[    2.303892] usbcore: registered new interface driver usb-storage
[    2.314032] [drm] Memory usable by graphics device = 2048M
[    2.331062] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
[    2.361773] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    2.361782] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.361783] [drm] Driver supports precise vblank timestamp query.
[    2.361831] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.379408] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.379411] [drm] This can cause pipe underruns and display issues.
[    2.379411] [drm] Please upgrade your BIOS to fix this.
[    2.408287] fbcon: inteldrmfb (fb0) is primary device
[    2.521857] Switched to clocksource tsc
[    2.592089] Console: switching to colour frame buffer device 160x64
[    2.594473] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.594475] i915 0000:00:02.0: registered panic notifier
[    2.594506] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.706242] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    3.025637] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.302285] scsi 4:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[    3.302492] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.303829] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.471417] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    3.563295] random: nonblocking pool is initialized
[    3.813417] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   16.061007] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.140351] systemd-udevd[379]: starting version 204
[   16.245337] lp: driver loaded but no devices found
[   16.255693] ppdev: user-space parallel port driver
[   16.256861] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   16.259436] parport_pc 00:07: reported by Plug and Play ACPI
[   16.259488] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.263455] media: module verification failed: signature and/or  required key missing - tainting kernel
[   16.263677] media: Linux media interface: v0.10
[   16.264550] Linux video capture interface: v2.00
[   16.264554] WARNING: You are using an experimental version of the media stack.
[   16.264554] 	As the driver is backported to an older kernel, it doesn't offer
[   16.264554] 	enough quality for its usage in production.
[   16.264554] 	Use it with care.
[   16.264554] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.264554] 	37e59f876bc710d67a30b660826a5e83e07101ce [media, edac] Change my email address
[   16.264554] 	4195086571d49e6ad63087621d397c4a9eddd152 [media] DocBook: Add a description for the Remote Controller interface
[   16.264554] 	90f745cea2190d42d2ee10eab6cddad526d6e521 [media] DocBook/media_api: Better organize the DocBook
[   16.291615] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[   16.291622] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.291650] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.357672] lp0: using parport0 (interrupt-driven).
[   16.365757] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   16.379482] SKU: Nid=0x1d sku_cfg=0x4005e601
[   16.379485] SKU: port_connectivity=0x1
[   16.379485] SKU: enable_pcbeep=0x0
[   16.379486] SKU: check_sum=0x00000005
[   16.379487] SKU: customization=0x000000e6
[   16.379488] SKU: external_amp=0x0
[   16.379488] SKU: platform_type=0x0
[   16.379489] SKU: swap=0x0
[   16.379490] SKU: override=0x1
[   16.379773] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   16.379774]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.379775]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.379776]    mono: mono_out=0x0
[   16.379776]    inputs:
[   16.379777]      Rear Mic=0x18
[   16.379779]      Front Mic=0x19
[   16.379779]      Line=0x1a
[   16.379780]      CD=0x1c
[   16.379781] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   16.379782] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   16.393355] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.393562] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.393633] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.393689] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.393813] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.393883] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   16.397607] device-mapper: multipath: version 1.6.0 loaded
[   16.448702] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.454443] WARNING: You are using an experimental version of the media stack.
[   16.454443] 	As the driver is backported to an older kernel, it doesn't offer
[   16.454443] 	enough quality for its usage in production.
[   16.454443] 	Use it with care.
[   16.454443] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.454443] 	37e59f876bc710d67a30b660826a5e83e07101ce [media, edac] Change my email address
[   16.454443] 	4195086571d49e6ad63087621d397c4a9eddd152 [media] DocBook: Add a description for the Remote Controller interface
[   16.454443] 	90f745cea2190d42d2ee10eab6cddad526d6e521 [media] DocBook/media_api: Better organize the DocBook
[   16.468889] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   16.689698] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   16.689912] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 17, latency: 32, mmio: 0xfbdff000
[   16.689921] saa7133[0]: subsystem: 5ace:7290, board: Beholder BeholdTV T7 [card=193,autodetected]
[   16.689936] saa7133[0]: board init: gpio is 0
[   16.834514] saa7133[0]: i2c eeprom 00: ce 5a 90 72 54 20 00 00 00 00 00 00 00 00 00 01
[   16.834523] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834528] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834533] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834537] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834542] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834546] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834551] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834555] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834560] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834564] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834569] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834573] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834578] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834582] saa7133[0]: i2c eeprom e0: a7 1f 01 00 ff ff ff ff ff ff ff ff ff ff ff ff
[   16.834587] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[   16.842590] tuner 9-0061: Tuner -1 found with type(s) Radio TV.
[   16.843466] xc5000 9-0061: creating new instance
[   16.850512] xc5000: Successfully identified at address 0x61
[   16.850514] xc5000: Firmware has not been loaded previously
[   16.966488] xc5000: waiting for firmware upload (dvb-fe-xc5000c-4.1.30.7.fw)...
[   17.122249] xc5000: firmware read 16497 bytes.
[   17.122251] xc5000: firmware uploading...
[   17.300163] init: failsafe main process (706) killed by TERM signal
[   17.645985] Bluetooth: Core ver 2.17
[   17.646001] NET: Registered protocol family 31
[   17.646003] Bluetooth: HCI device and connection manager initialized
[   17.646011] Bluetooth: HCI socket layer initialized
[   17.646014] Bluetooth: L2CAP socket layer initialized
[   17.646019] Bluetooth: SCO socket layer initialized
[   17.648939] Bluetooth: RFCOMM TTY layer initialized
[   17.648949] Bluetooth: RFCOMM socket layer initialized
[   17.648954] Bluetooth: RFCOMM ver 1.11
[   17.649340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.649342] Bluetooth: BNEP filters: protocol multicast
[   17.649346] Bluetooth: BNEP socket layer initialized
[   18.012148] init: cups main process (787) killed by HUP signal
[   18.012157] init: cups main process ended, respawning
[   19.602125] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
[   19.602677] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   19.733618] init: samba-ad-dc main process (813) terminated with status 1
[   20.457749] xc5000: firmware upload complete...
[   21.557485] Registered IR keymap rc-behold
[   21.557575] input: i2c IR (BeholdTV) as /devices/virtual/rc/rc0/input11
[   21.557624] rc0: i2c IR (BeholdTV) as /devices/virtual/rc/rc0
[   21.557627] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-9/9-002d/ir0 [saa7133[0]]
[   21.557935] saa7133[0]: registered device video0 [v4l2]
[   21.557997] saa7133[0]: registered device vbi0
[   21.558054] saa7133[0]: registered device radio0
[   21.559600] saa7134 ALSA driver for DMA sound loaded
[   21.559627] saa7133[0]/alsa: saa7133[0] at 0xfbdff000 irq 17 registered as card -2
[   21.560874] WARNING: You are using an experimental version of the media stack.
[   21.560874] 	As the driver is backported to an older kernel, it doesn't offer
[   21.560874] 	enough quality for its usage in production.
[   21.560874] 	Use it with care.
[   21.560874] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   21.560874] 	37e59f876bc710d67a30b660826a5e83e07101ce [media, edac] Change my email address
[   21.560874] 	4195086571d49e6ad63087621d397c4a9eddd152 [media] DocBook: Add a description for the Remote Controller interface
[   21.560874] 	90f745cea2190d42d2ee10eab6cddad526d6e521 [media] DocBook/media_api: Better organize the DocBook
[   21.592693] dvb_init() allocating 1 frontend
[   21.623732] dvb_init() Wating 1,5 seconds for I2C bus to become free, before attaching tuner to DVB.
[   21.722495] xc5000: I2C write failed (len=4)
[   21.722517] xc5000: I2C read failed
[   21.746007] xc5000: I2C read failed
[   21.746167] xc5000: I2C read failed
[   21.746169] xc5000: waiting for firmware upload (dvb-fe-xc5000c-4.1.30.7.fw)...
[   21.746189] xc5000: firmware read 16497 bytes.
[   21.746190] xc5000: firmware uploading...
[   22.277812] vboxdrv: Found 4 processor cores.
[   22.277967] vboxdrv: fAsync=0 offMin=0x33e offMax=0x1dea
[   22.278040] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   22.278042] vboxdrv: Successfully loaded version 4.3.26 (interface 0x001a000a).
[   22.488258] vboxpci: IOMMU not found (not registered)
[   22.596958] init: plymouth-upstart-bridge main process ended, respawning
[   22.871735] init: plymouth-stop pre-start process (1659) terminated with status 1
[   23.125166] xc5000 9-0061: attaching existing instance
[   23.137140] xc5000: Successfully identified at address 0x61
[   23.137143] xc5000: Firmware has not been loaded previously
[   23.137147] DVB: registering new adapter (saa7133[0])
[   23.137152] saa7134 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Si2168 DVB-T2/C)...
[   25.140735] xc5000: firmware upload complete...
[   43.853664] si2168_set_frontend: system=16 frequency=554000000 bandwidth=8000000 symrate=0 qam=6 stream_id=0
Andrey-Linux ~ # 
